Okay, so my temps are great I have a pretty nice cooling system setup. I got the computer turned on at 5GHz and 1.440v, ran a 14 hour prime 95 test and stopped it and declared it stable. Apparently I ran the wrong test, I don't know what test it was but it wasn't blend. I just updated Prime95 to the latest version and it for some reason automatically starts testing as soon as you open the application, and I assumed that was the standard blend test.
I got a couple blue screens, one while playing bf3 and another while just browsing or idling....
So I tried to up the volts a little and run it again, I upped it to 1.448v and it blue screened after a little over 3 hours of blend, then I upped the voltage to 1.464v and it blue screened again around the same time ( a little over 3 hours). So before now, I have had my vcore on offset and LLC Level 3, the last time that gave me 1.464 was +0.100v on LLC Level 3.
So this time instead of upping the volts I just changed it to +0.100v on LLC Level 2. Now its giving me a voltage of about 1.488. I just started running prime95 blend to see if this will work now, What do you think, should I have done that ? Does anyone have any other suggestions?
I got a couple blue screens, one while playing bf3 and another while just browsing or idling....
So I tried to up the volts a little and run it again, I upped it to 1.448v and it blue screened after a little over 3 hours of blend, then I upped the voltage to 1.464v and it blue screened again around the same time ( a little over 3 hours). So before now, I have had my vcore on offset and LLC Level 3, the last time that gave me 1.464 was +0.100v on LLC Level 3.
So this time instead of upping the volts I just changed it to +0.100v on LLC Level 2. Now its giving me a voltage of about 1.488. I just started running prime95 blend to see if this will work now, What do you think, should I have done that ? Does anyone have any other suggestions?





would help a lot <3.



