Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › NZXT Switch 810 "Black an White"
New Posts  All Forums:Forum Nav:

NZXT Switch 810 "Black an White"

post #1 of 6
Thread Starter 
Alright so this is my first Major Build with Water Cooling and Even some case modding involved! biggrin.gif

My plans were to make this a Sapphire themed build cause im using a lot of sapphire parts lol. BUT Decided to Make a very nice and clean Black an White build With some white Lights. Also some case mods smile.gif

PARTS -
Case, NZXT Switch 810
Board, Sapphire X79n Pure Black (Pre Release)
CPU, i7-3820 (Currently Stock speeds, Last board was having issues so i had to RMA it.)
Ram, 16gb of Gskill 1600 Sniper series
GPU's, 2 Sapphire 6970's (One Ref, one Non ref)
PSU, AX1200 ( Will be sleeving the cables Black and white.)
Main HDD, Corsair Force 3 240gb SSD
Storage, 3tb WD Green, 1.5tb seagate cuda, 1tb seagate cuda.
2 Black Ice Rads, 1 3x120 and 1 2x120 (Both in Push Pull config)
Koolance CPU Block 370SI
Koolance Res setup (80mm Diameter 120mm Tall)
10 Feet of Black Tubing 1/2 3/4
1/2 Barbs (Getting compression Fittings eventually)

NOTE - This System is far from finished.. biggrin.gif Pics Below is of whats been done so far.

450 This Picture Shows all the components taken out to get ready for the new parts and WC system.
450 Here i decided to Mod the front case panel to fit in an Alpha Cool LCD Display.
450 This is what it looked like finished smile.gif450 Got the first Rad in and Res mounted smile.gif But later decided to flip the Rad so port would be on the top and not bottom.
450 Motherboard is in place cables are cleaned up a bit, lookin good!
450 Both of the 6970's go in!450 Cables... Managed!450 Oh so clean looking biggrin.gif

More to come, Just got an email from Frozencpu.com My $300 Order of water cooling stuff will be here by the 11th!!!! biggrin.gif:D:D:D:D
Edited by slayer677 - 7/5/12 at 9:19pm
post #2 of 6
Thread Starter 
If anyone has some ideas i could maybe do.. that would be great thumb.gif
post #3 of 6
Moar! MOAR! I like the LCD MOD on the front! Very classy!
post #4 of 6
Subbed.
post #5 of 6
Thread Starter 
Quote:
Originally Posted by XNine View Post

Moar! MOAR! I like the LCD MOD on the front! Very classy!

Lol Thanks smile.gif This was my first mod ever, i was a little worried about cutting up my case but it turned out ok. Now i want to cut it up more! lol.

I will post pics later i have a large package comming!!
post #6 of 6
Thread Starter 
Thanks for subbing smile.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › NZXT Switch 810 "Black an White"