Overclock.net › Forums › Volt Mods › General Volt Mods › Graphics Cards Volt Mods › vmoded hd4650 and what software i must use for clocking
New Posts  All Forums:Forum Nav:

vmoded hd4650 and what software i must use for clocking

post #1 of 35
Thread Starter 
Hi i have vmoded hd4650, but i dont know what oc software i must use for overclocking, msi afternburner dont work, its non reference card
post #2 of 35
Try Rivatuner or ATITool
post #3 of 35
Thread Starter 
yeah they let me overclock but dont let increase voltage
post #4 of 35
I don't think it has that option. You need to hardmod it to do that.
What kind of mod did you do?
post #5 of 35
Thread Starter 
i have hardmod i bought that on ebay with hardmod
post #6 of 35
So there must be a VR on the card (Should look like this http://www.westfloridacomponents.com/mm5/graphics/p129.jpg) . Do you have a DMM (Digital Multi Meter)? It's the only way you can monitor voltages.
Can you show pics of the card?
post #7 of 35
Thread Starter 
Yeah there is potentiometer installed, i must screw that screw on this potentiometer?
post #8 of 35
NOT yet! You must check your voltage first! Show me the backside of your card. Or just find a picture of it on the internet.
When you know what the voltage is and where you measure it, you can start turning the VR while measuring the volts.
post #9 of 35
Thread Starter 
post #10 of 35
http://i2.sqi.sh/s_3/eZS/vmodexplain.jpg

One of the yellow spots is vGPU, you can try all of them to find it. If it's 0v it's ground, if ~12v it's input voltage and if it's ~1.1v it's vGPU.
Now it's pretty much straight forward. You know what to do right? biggrin.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Graphics Cards Volt Mods
Overclock.net › Forums › Volt Mods › General Volt Mods › Graphics Cards Volt Mods › vmoded hd4650 and what software i must use for clocking