Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Bitfenix Prodigy & Phenom Owner's Club
New Posts  All Forums:Forum Nav:

[Official] Bitfenix Prodigy & Phenom Owner's Club - Page 542

post #5411 of 11736
friends;
Bitfenix prodigy side cover does not recognize usb usb3 connections z77e also ITX ASROCK motherboard power LED does not light amount of light.
I wonder LED, power, reset, HDD LED connections Can I made ​​a mistake.
post #5412 of 11736
Quote:
Originally Posted by kazuya05 View Post

friends;
Bitfenix prodigy side cover does not recognize usb usb3 connections z77e also ITX ASROCK motherboard power LED does not light amount of light.
I wonder LED, power, reset, HDD LED connections Can I made ​​a mistake.

It has been a problem for most if not all. I have wired up my own power switches and a new USB 3.0 and I have no issues thumb.gif
post #5413 of 11736
Same I'm using the asrock mobo and the lights don't work, I probably put them in backwards but that is probably for the best, I don't care much for status lights wink.gif

Anyone know if the computer would throw a fit if I disconnect the light connections and just kept the essential pwr,reset,and usb 3.0 connections? I'm trying to reduce clutter wherever possible, the usb 3.0 is the big culprit right now and I might ditch that as well and just use the back mobo hookup (by ditch I mean tie to the panel so it cant be seen through a window)
    
CPUMotherboardGraphicsRAM
Intel Core i5-3570K 3.4GHz Quad-Core Processor ASrock Z77E-ITX Mini ITX LGA1155 GALAXY GeForce GTX 670 4GB G.Skill Ares Series 8GB DDR3-1600  
Hard DriveHard DriveCoolingCooling
Western Digital Caviar Blue Corsair Neutron GTX 240GB Swiftech H220 Corsair AF120 
OSMonitorKeyboardPower
Windows 8 OEM Asus VE228H 21.5" Ducky Shine II (Purple) Silverstone ST55F-G (550watts) 
CaseMouseAudioOther
Caselabs Mercury  Cyborg R.A.T. 7 Albino Bose IE2 Earbuds TripTCC Backplate 
Other
Modeler's LEDs 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i5-3570K 3.4GHz Quad-Core Processor ASrock Z77E-ITX Mini ITX LGA1155 GALAXY GeForce GTX 670 4GB G.Skill Ares Series 8GB DDR3-1600  
Hard DriveHard DriveCoolingCooling
Western Digital Caviar Blue Corsair Neutron GTX 240GB Swiftech H220 Corsair AF120 
OSMonitorKeyboardPower
Windows 8 OEM Asus VE228H 21.5" Ducky Shine II (Purple) Silverstone ST55F-G (550watts) 
CaseMouseAudioOther
Caselabs Mercury  Cyborg R.A.T. 7 Albino Bose IE2 Earbuds TripTCC Backplate 
Other
Modeler's LEDs 
  hide details  
Reply
post #5414 of 11736
Quote:
Originally Posted by Dmz96 View Post

Same I'm using the asrock mobo and the lights don't work, I probably put them in backwards but that is probably for the best, I don't care much for status lights wink.gif

Anyone know if the computer would throw a fit if I disconnect the light connections and just kept the essential pwr,reset,and usb 3.0 connections? I'm trying to reduce clutter wherever possible, the usb 3.0 is the big culprit right now and I might ditch that as well and just use the back mobo hookup (by ditch I mean tie to the panel so it cant be seen through a window)

It should be fine. I unhooked my hard drive led's since that thing is WAAAAYY too bright and annoying. Technically, you don't need any of those connectors from the side panel, except the power and reset buttons. You could just make a custom power switch though, and have it mounted somewhere else.

On a side note, my USB3.0 seems to work fine. Before I had the drivers installed to get the proper speed of it, the motherboard still recognized that as a normal USB connector... it just didn't work at the same speed that a 3.0 would. After I loaded the motherboard drivers though, it works fine. I am using an MSI AMD-based motherboard though too... so there might be a problem with certain ASRock ones, or the drivers don't recognize it.
post #5415 of 11736
Cool, I think I'll just use the back USB 3.0,not that there is anything wrong with the side panel ones, its just that the connection is very flimsy and is in the way of a future window. plus I only need the two on the back for a mouse and keyboard biggrin.gif

Do I need the reset button btw? Or is that nonessential? I've yet to use it, as I've only been on laptops and these past few months are my first time on a desktop in years. Can't i just hold down the pwr button if something goes wrong as well or does the reset button serve another purpose?
    
CPUMotherboardGraphicsRAM
Intel Core i5-3570K 3.4GHz Quad-Core Processor ASrock Z77E-ITX Mini ITX LGA1155 GALAXY GeForce GTX 670 4GB G.Skill Ares Series 8GB DDR3-1600  
Hard DriveHard DriveCoolingCooling
Western Digital Caviar Blue Corsair Neutron GTX 240GB Swiftech H220 Corsair AF120 
OSMonitorKeyboardPower
Windows 8 OEM Asus VE228H 21.5" Ducky Shine II (Purple) Silverstone ST55F-G (550watts) 
CaseMouseAudioOther
Caselabs Mercury  Cyborg R.A.T. 7 Albino Bose IE2 Earbuds TripTCC Backplate 
Other
Modeler's LEDs 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i5-3570K 3.4GHz Quad-Core Processor ASrock Z77E-ITX Mini ITX LGA1155 GALAXY GeForce GTX 670 4GB G.Skill Ares Series 8GB DDR3-1600  
Hard DriveHard DriveCoolingCooling
Western Digital Caviar Blue Corsair Neutron GTX 240GB Swiftech H220 Corsair AF120 
OSMonitorKeyboardPower
Windows 8 OEM Asus VE228H 21.5" Ducky Shine II (Purple) Silverstone ST55F-G (550watts) 
CaseMouseAudioOther
Caselabs Mercury  Cyborg R.A.T. 7 Albino Bose IE2 Earbuds TripTCC Backplate 
Other
Modeler's LEDs 
  hide details  
Reply
post #5416 of 11736
Quote:
Originally Posted by Dmz96 View Post

Cool, I think I'll just use the back USB 3.0,not that there is anything wrong with the side panel ones, its just that the connection is very flimsy and is in the way of a future window. plus I only need the two on the back for a mouse and keyboard biggrin.gif

Do I need the reset button btw? Or is that nonessential? I've yet to use it, as I've only been on laptops and these past few months are my first time on a desktop in years. Can't i just hold down the pwr button if something goes wrong as well or does the reset button serve another purpose?

Yeah, technically you don't need the reset button... it helps though, and it's easier on the computer than forcing it to shut down by holding the power button.
post #5417 of 11736
ok reset button is unnecessary.
usb, but very valuable for me.
Occasionally attracts wireless devices at the rear.
If you have a device that is permanently attached to the balloon as it does not recognize the error.
post #5418 of 11736
Hi guys, I don't have a Prodigy, but I am seriously looking into getting one. If someone could give me the outer dimensions of the PSU cage in cm, mm, or inches, that would be wonderful. Also if anyone has an SSD/2.5 HDD mounted on the power cage, do the SATA connections stick above the Motherboard tray?
Psychosis
(20 items)
 
FamilyHTPC
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7 3820 ASUS X79-DELUXE EVGA GTX 980 Classified EVGA GTX 980 Classified 
RAMHard DriveHard DriveHard Drive
16GB Corsair Vengeance 1600MHz Mushkin Enhanced Chronos 120GB Samsung 850 EVO 250GB Western Digital Caviar Blue 500GB 
Hard DriveCoolingOSMonitor
Western Digital Caviar Blue 320GB Cooler Master Nepton 240mm Windows 7 Pro 64-bit ASUS VE248H 
MonitorKeyboardPowerCase
Dell IN2020M WASD CODE MX Clears BeQuiet PowerZone 850W Phanteks Enthoo Pro 
MouseMouse PadAudioAudio
Logitech G700s $3 Walmart thing Logitech S120 + subwoofer Kingston HyperX Cloud II 
CPUMotherboardGraphicsGraphics
Intel Core i3 3570K ASUS Z77-A MSI GTX 970 EVGA GTX 950 
RAMHard DriveHard DriveCooling
G.SKILL Ares 4x4GB 1600MHz Orange SanDisk SSD Plus 120GB [OS] Western Digital Caviar Black 4TB (WD4003FZEX) [... Cooler Master Hyper 212 EVO 
CoolingCoolingOSMonitor
Corsair SP120 HP dual pack 4xCorsair AF120 QE Windows 7 Pro 64bit 55" LG 1080p TV 
MonitorKeyboardPowerCase
TeamViewer Microsoft Keyboard 800 Antec TruePower Quattro 850W Cooler Master HAF 932 
Mouse
Microsoft Mouse 1000 
CPUMotherboardGraphicsRAM
Intel Xeon X3440 Asus P7H55-M DP MSI GTX 770 Lightning 4GB 1333MHz ASint Technology 
Hard DriveCoolingCoolingOS
SanDisk SSD Plus 120GB Cooler Master TX3 Enough fans to keep it cool Currently Windows 7 
OSMonitorKeyboardPower
Soon to be Ubuntu 14.04 LTS again Dell IN2020M Teamviewer/Generic Bitfenix Fury 650G 
CaseMouse
Fractal Design Arc Mini Teamviewer/Generic 
  hide details  
Reply
Psychosis
(20 items)
 
FamilyHTPC
(17 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7 3820 ASUS X79-DELUXE EVGA GTX 980 Classified EVGA GTX 980 Classified 
RAMHard DriveHard DriveHard Drive
16GB Corsair Vengeance 1600MHz Mushkin Enhanced Chronos 120GB Samsung 850 EVO 250GB Western Digital Caviar Blue 500GB 
Hard DriveCoolingOSMonitor
Western Digital Caviar Blue 320GB Cooler Master Nepton 240mm Windows 7 Pro 64-bit ASUS VE248H 
MonitorKeyboardPowerCase
Dell IN2020M WASD CODE MX Clears BeQuiet PowerZone 850W Phanteks Enthoo Pro 
MouseMouse PadAudioAudio
Logitech G700s $3 Walmart thing Logitech S120 + subwoofer Kingston HyperX Cloud II 
CPUMotherboardGraphicsGraphics
Intel Core i3 3570K ASUS Z77-A MSI GTX 970 EVGA GTX 950 
RAMHard DriveHard DriveCooling
G.SKILL Ares 4x4GB 1600MHz Orange SanDisk SSD Plus 120GB [OS] Western Digital Caviar Black 4TB (WD4003FZEX) [... Cooler Master Hyper 212 EVO 
CoolingCoolingOSMonitor
Corsair SP120 HP dual pack 4xCorsair AF120 QE Windows 7 Pro 64bit 55" LG 1080p TV 
MonitorKeyboardPowerCase
TeamViewer Microsoft Keyboard 800 Antec TruePower Quattro 850W Cooler Master HAF 932 
Mouse
Microsoft Mouse 1000 
CPUMotherboardGraphicsRAM
Intel Xeon X3440 Asus P7H55-M DP MSI GTX 770 Lightning 4GB 1333MHz ASint Technology 
Hard DriveCoolingCoolingOS
SanDisk SSD Plus 120GB Cooler Master TX3 Enough fans to keep it cool Currently Windows 7 
OSMonitorKeyboardPower
Soon to be Ubuntu 14.04 LTS again Dell IN2020M Teamviewer/Generic Bitfenix Fury 650G 
CaseMouse
Fractal Design Arc Mini Teamviewer/Generic 
  hide details  
Reply
post #5419 of 11736
Quote:
Originally Posted by dman811 View Post

Hi guys, I don't have a Prodigy, but I am seriously looking into getting one. If someone could give me the outer dimensions of the PSU cage in cm, mm, or inches, that would be wonderful. Also if anyone has an SSD/2.5 HDD mounted on the power cage, do the SATA connections stick above the Motherboard tray?

To the second question,yes they do
Feed The Dada
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600k Asrock Z77e-itx MSI 7970 Samsung 30nm 8GB 
Hard DriveCoolingCoolingOS
Samsung 840 250GB SSD H100 w/ 2x SP120 Antec Kuhler 920 w/ 1x SP120 Linux Ubuntu 10.10 
PowerCaseAudioAudio
Seasonic X650 Bitfenix Prodigy E07K HFI-580 
  hide details  
Reply
Feed The Dada
(12 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600k Asrock Z77e-itx MSI 7970 Samsung 30nm 8GB 
Hard DriveCoolingCoolingOS
Samsung 840 250GB SSD H100 w/ 2x SP120 Antec Kuhler 920 w/ 1x SP120 Linux Ubuntu 10.10 
PowerCaseAudioAudio
Seasonic X650 Bitfenix Prodigy E07K HFI-580 
  hide details  
Reply
post #5420 of 11736
Quote:
Originally Posted by kazuya05 View Post

friends;
Bitfenix prodigy side cover does not recognize usb usb3 connections z77e also ITX ASROCK motherboard power LED does not light amount of light.
I wonder LED, power, reset, HDD LED connections Can I made ​​a mistake.

I had that problem...then I realized that I had both 2.0 and 3.0 from the side I/O plugged into my motherboard. So, I just unplugged the 2.0 and it worked.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Bitfenix Prodigy & Phenom Owner's Club