Originally Posted by ThaWaxShop
Mine wasnt on wrong just intels pushpin things requires alot of force and it wasnt all the way clicked in
Tuniq. She's down pretty tight. Same tightness as it was on my abit board. Temps are 19C in the bios.
The main problem now is having file copy errors and windows installation errors. I'm thinking RAM.... I'm going to leave the CMOS battery out overnight because now it wont even post with my RAM. I tried installing windows on one stick, problems, and when I swapped sticks to try and install with that stick, it wouldnt post since then. Not with both sticks, or either stick. I've cleared the CMOS with the jumper and removing the battery (no luck). My friend qtwre
is bringing a stick of his OCZ DDR2-800 to school tommorrow, and I am bringing him a stick of my ram. He has the same board/gpu/cpu as me. If it works in his system no problem, my board must be bad. I WOULD flash my bios, but it wont post and I dont have access to a floppy drive (seriously). I will get a floppy for tommorrow though.