The current Bulldozer architecture that powers the AMD FX series of processors is not exactly an optimal solution. It works, and seems to do fine, but it does not surpass the performance of the previous generation Phenom II X6 series of chips in any meaningful way. Let us not mention how it compares to Intel’s Sandy Bridge and Ivy Bridge products. It is not that the design is inherently flawed or bad, but rather that it was a unique avenue of thought that was not completely optimized. The train of thought is that AMD seems to have given up on the high single threaded performance that Intel has excelled at for some time. Instead they are going for good single threaded performance, and outstanding multi-threaded performance. To achieve this they had to rethink how to essentially make the processor as wide as possible, keep the die size and TDP down to reasonable sizes, and still achieve a decent amount of performance in single threaded applications.
Bulldozer was meant to address this idea, and its success is debatable. The processor works, it shows up as an eight logical core processor, and it seems to scale well with multi-threading. The problem, as stated before, is that it does not perform like a next generation part. In fact, it is often compared to Intel’s Prescott, which was a larger chip on a smaller process than the previous Northwood processor, but did not outperform the earlier part in any meaningful way (except in heat production). The difference between Intel and AMD in this aspect is that as compared to Prescott, Bulldozer as an entirely new architecture as compared to the Prescott/Northwood lineage. AMD has radically changed the way it designs processors. Taking some lessons from the graphics arm of the company and their successful Radeon brand, AMD is applying that train of thought to processors.
Now what Ive seen with the Trinity bench is AMD has adressed the areas that Bulldozer in the area of power consumption. The A10 5700 runs at 3.4 and turbo to 4.0Ghz at 65W