Originally Posted by JayGB1982
How did the push pull affect your temps?
Nicely done on the push pull, I'll have to give it a go on my rig when it all turns up.
Haven't done any testing on temps yet. With just push it was a huge decrease in load temp versus the stock Intel cooler, but I'm still trying to find the best way to OC on an Intel system. This is my first Intel build.
You'll need 8 extra 6-32 1.25" screws to mount the 2 additional fans. And a friend there for some extra hands would make it go much quicker.
Originally Posted by ZeVo
Are they running at max speed? Hopefully I don't have to worry about them because I'll have them mounted vertically.
The SP120s on the H100i are running around 1000RPM, and the AF120s are running around 1150 RPM. I have my case sitting on top of my desk and all I hear is a gentle woosh. I can hear my mechanical hard drive over them. I'm not worrying with them running upside down, cause the noise is almost unnoticeable. It's definitely not a "Oh god I'm running upside down my bearings are going to explode" kind of noise. haha