Quote:
Originally Posted by struddles 
I have the Asus Rampage 4 Extreme and i see what you mean. When I install the H100 I will be removing the top 200 exhaust to install it. Since I will no longer have the h80 taking up my rear exhaust could I make the back 140mm an intake so it would blow over the VRM heat sink?
H80 is currently installed with air passing from outside to inside of case. I will also have the H100 pulling cold air in from the outside

I have the Asus Rampage 4 Extreme and i see what you mean. When I install the H100 I will be removing the top 200 exhaust to install it. Since I will no longer have the h80 taking up my rear exhaust could I make the back 140mm an intake so it would blow over the VRM heat sink?
H80 is currently installed with air passing from outside to inside of case. I will also have the H100 pulling cold air in from the outside
Love the board. the heatsink you need to focus on is the one above the cpu socket. without any extra cooling, the surface of my heatsink reads 70 to 80c under full load (which means the vrm's are even hotter). I rigged up my delta. propped it up on the video card and used zip ties to secure it and watched the heatsink temps drop below 50c. you wont need it for day to day use but during prime runs it is good to keep those VRM's cool.

















