I'm having an issue with my OCN Ducky 9008G2 that I've had a bit over a year now. I recently built a new PC and found out that my keyboard doesn't work in a BIOS or UEFI.
The motherboards I've tested it on are my previous Asus P6T6 WS Revolution and my current Asus P8Z77-V Deluxe. Both of these boards recognize that a keyboard is connected during the POST screen (and oddly enough says two keyboards are recognized with the P8Z77-V Deluxe), both boards have USB enabled, and I've tried multiple USB ports on both boards (both 2.0 and 3.0). Nothing I do enables keystrokes by the Ducky to get recognized. I've tried four other cheap USB keyboards in my house and all of them work just fine in the BIOS and UEFI on both boards.
Do you guys have any tips? It's really annoying that I have to keep a $5 USB keyboard around my desk to do UEFI/BIOS level operations because my 20x more expensive keyboard doesn't work correctly. Thanks.
The motherboards I've tested it on are my previous Asus P6T6 WS Revolution and my current Asus P8Z77-V Deluxe. Both of these boards recognize that a keyboard is connected during the POST screen (and oddly enough says two keyboards are recognized with the P8Z77-V Deluxe), both boards have USB enabled, and I've tried multiple USB ports on both boards (both 2.0 and 3.0). Nothing I do enables keystrokes by the Ducky to get recognized. I've tried four other cheap USB keyboards in my house and all of them work just fine in the BIOS and UEFI on both boards.
Do you guys have any tips? It's really annoying that I have to keep a $5 USB keyboard around my desk to do UEFI/BIOS level operations because my 20x more expensive keyboard doesn't work correctly. Thanks.
The Barnacle
(28 items) |
|
The Barnacle
(28 items) |
. Would you say it's safe to say that the issue is with my particular keyboard since your 9008G2 works fine with your P8Z77-V series motherboard? I also tried a new USB cable on the keyboard in case that was the issue. What can I do from here? I assume OCN keyboards don't carry any warranty.
