Overclock.net › Forums › Cooling › Water Cooling › Aquacomputer new reservoirs, Aqualis
New Posts  All Forums:Forum Nav:

Aquacomputer new reservoirs, Aqualis - Page 15

post #141 of 279
Quote:
Originally Posted by Anoxy View Post

Now that I have it set up in my own build, here are some photos to illustrate my questions:
Warning: Spoiler! (Click to show)


Which two ports should I use for In and Out if I want to achieve the fountain effect?



Although Shoggy has already said about you use the center port on the res to achieve the fountain effect with this type of res.. I don't have one of these res's myself (I do have 4 or 5 of the AC other type res's just not got this type yet) but the above pic I've done is how I understand it works for the fountain effect...

I'm sure Shoggy or someone will put me right if it's wrong mind tongue.gif.. But I think that's how it would work.. The "OUT" port on the pump top should be your feed to the loop from the Res... The Center Port in the base of your res should be used for the return from your loop & this then provides the flow to go up the tube in the Res & the loop fluid is then fountained into the res from the 8 or so holes that are in the inside of the res top...

Anyway hope this helps & sorry for butting in:thumb:

N.
post #142 of 279
Quote:
Originally Posted by Nornam View Post



Although Shoggy has already said about you use the center port on the res to achieve the fountain effect with this type of res.. I don't have one of these res's myself (I do have 4 or 5 of the AC other type res's just not got this type yet) but the above pic I've done is how I understand it works for the fountain effect...

I'm sure Shoggy or someone will put me right if it's wrong mind tongue.gif.. But I think that's how it would work.. The "OUT" port on the pump top should be your feed to the loop from the Res... The Center Port in the base of your res should be used for the return from your loop & this then provides the flow to go up the tube in the Res & the loop fluid is then fountained into the res from the 8 or so holes that are in the inside of the res top...

Anyway hope this helps & sorry for butting in:thumb:

N.

Yep, middle is waterfall water in and other is water out to system.
post #143 of 279
Thanks dudes
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
post #144 of 279
edit: thank you hiarc!
Edited by Anoxy - 3/14/14 at 9:16pm
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
post #145 of 279
Alright, back again with more confusion from the reservoir.

I plugged that port on the pump adapter and got my loop filled. But water is not returning to the reservoir. My loop is just filled and stagnant.

The design on this doesn't make sense to me. If I'm feeding water into the reservoir through that central port, there is still only one port for the water to enter the reservoir and leave it. So what's stopping the water paths from crossing? What's forcing the water to even go up the brass tube in my reservoir?

I'm having the same exact confusion as this guy, and even though somebody replied and said it works, it still doesn't make sense to me. I might have to tear it out of my loop again, and this would make me really sad.
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
post #146 of 279
I filled the res from the inlet at the top of the reservoir. Not sure if u have the same model as me though... I put a fitting into the hole. Attached some tubing and held it high into the air and poured water into it with a funnel cone. Then turned on the pump on and off to keep pushing water through the system. U cabt have the loop fully sealed when ur trying to fill your loop up, air has to be able to escape.
post #147 of 279
Quote:
Originally Posted by 107Spartan View Post

I filled the res from the inlet at the top of the reservoir. Not sure if u have the same model as me though... I put a fitting into the hole. Attached some tubing and held it high into the air and poured water into it with a funnel cone. Then turned on the pump on and off to keep pushing water through the system. U cabt have the loop fully sealed when ur trying to fill your loop up, air has to be able to escape.
Oh I know that. What confuses me is the internal port configuration of the reservoir and pump adapter. There is only one port for water to go in and out of the reservoir/pump, shown here:



So how will the water go up the brass tube and out the fountain instead of just going straight back into the pump again?
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
post #148 of 279
Oh I cant help you with that question sadly. I have a mcp-35x and it doesnt need a pump top for it.
post #149 of 279
I figured it out. Had to open the top middle port on the reservoir cap to allow air to escape I guess.


Letting the primochill sysrep run through my system overnight....and jeeze this thing is so bright I have a night light when I get up to pee tongue.gif


Edited by Anoxy - 3/16/14 at 12:18am
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
December
(26 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC EVGA GTX 780 SC 
RAMHard DriveHard DriveCooling
Corsair Dominator Platinum 1866 16GB Samsung 840 Pro Series 128GB Sandisk Extreme SSD 120GB XSPC RX360 V3 
CoolingCoolingCoolingCooling
EK Titan SE Acetal/Copper blocks EK Titan SE backplates Primochill Advanced LRT (clear) Aquacomputer Aqualis 880ml 
CoolingCoolingCoolingCooling
Bitspower Comp. Fittings (Black) Lamptron CW611 36W - 6 Channel Fan Controller Swiftech MCP-655-PWM-DRIVE pump EK Terminal Block - Dual Parallel 3-Slot 
CoolingCoolingOSMonitor
XSPC RX480 V3 EK Supremacy Nickel Windows 8 Pro Dell U3014 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid (Cherry MX Browns) Corsair AX1200i Caselabs SM8 Razer Deathadder 2013 
AudioAudio
Audio GD NFB 12.1 DAC/Amp Sennheiser HD650 
  hide details  
Reply
post #150 of 279
Mhhh, not sure if that is correct. What have you done right now? If you had to screw out the upper sealing cap a bit, than I assume there is something wrong here. I can remember another customer that had the problem the the inner tube was a tad too long. In this case the opening for the water sits next to the sealing cap which means that no or almost no water can escape there. If you slightly unscrew the cap water can escape but the reservoir might not be sealed anymore.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Aquacomputer new reservoirs, Aqualis