Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Drivers and Overclocking Software › ATItool won't work
New Posts  All Forums:Forum Nav:

ATItool won't work

post #1 of 36
Thread Starter 
OMG I'm getting mad...I've used this before on my PC to OC with my old graphics card, but today when I tried to use it, I got this weird yellow graphical glitch (artifact?) around the edge of the 3D cube. Also, there were beeps every second, as if there were artifacts detected, then when i checked my logfile, I found this:
2006-11-01 23:26:23 ATITool v0.25 Beta 10 started.
2006-11-01 23:26:24 D Successfully connected to driver, version 123
2006-11-01 23:26:24 D Found ATI device: 0x1002 0x71CE bus 2 dev 0
2006-11-01 23:26:24 D fbPhy: 0xE0000000, mmrPhy: 0xFDBF0000.
2006-11-01 23:26:24 D mmapped mmr to 0xCF0000
2006-11-01 23:26:24 D BIOS at 0xC0000
2006-11-01 23:26:24 D mmapped bios to 0xD00000
2006-11-01 23:26:24 D GB_TILE_CONFIG:1410011
2006-11-01 23:26:24 D 4 pipes
2006-11-01 23:26:24 D Temperature monitoring: Not supported
2006-11-01 23:26:24 D VT1103 chip detection: failed (0x0)
2006-11-01 23:26:24 D Device initialized successfully
2006-11-01 23:26:32 Find Max Core started...
2006-11-01 23:26:34 Artifacts detected after 00:00.00. 6198 pixels don't match.
2006-11-01 23:26:35 Clocks set to: 497.25 / 391.50
2006-11-01 23:26:35 Artifacts detected after 00:01.01. 6198 pixels don't match.
2006-11-01 23:26:36 Clocks set to: 496.80 / 391.50
2006-11-01 23:26:36 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:37 Clocks set to: 496.13 / 391.50
2006-11-01 23:26:38 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:38 Clocks set to: 495.00 / 391.50
2006-11-01 23:26:39 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:39 Clocks set to: 494.10 / 391.50
2006-11-01 23:26:40 Artifacts detected after 00:01.21. 6198 pixels don't match.
2006-11-01 23:26:40 Clocks set to: 492.75 / 391.50
2006-11-01 23:26:41 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:41 Clocks set to: 491.79 / 391.50
2006-11-01 23:26:42 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:42 Clocks set to: 491.40 / 391.50
2006-11-01 23:26:43 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:43 Clocks set to: 490.50 / 391.50
2006-11-01 23:26:44 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:44 Clocks set to: 489.86 / 391.50
2006-11-01 23:26:45 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:45 Clocks set to: 489.38 / 391.50
2006-11-01 23:26:46 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:46 Clocks set to: 488.70 / 391.50
2006-11-01 23:26:47 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:47 Clocks set to: 487.93 / 391.50
2006-11-01 23:26:48 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:48 Clocks set to: 486.00 / 391.50
2006-11-01 23:26:49 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:49 Clocks set to: 484.07 / 391.50
2006-11-01 23:26:50 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:50 Clocks set to: 483.30 / 391.50
2006-11-01 23:26:51 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:26:51 Clocks set to: 482.63 / 391.50
2006-11-01 23:26:51 Scan aborted. Total runtime: 17 seconds. Artifact-free: 0 seconds. Core: 482.50 Mhz Memory: 391.50 Mhz
2006-11-01 23:26:51 Find Max Core started...
2006-11-01 23:26:52 Scan aborted. Total runtime: 1 seconds. Artifact-free: 1 seconds. Core: 482.63 Mhz Memory: 391.50 Mhz
2006-11-01 23:26:54 Find Max Memory started...
2006-11-01 23:26:58 Clocks set to: 482.63 / 396.00
2006-11-01 23:26:58 Scan aborted. Total runtime: 4 seconds. Artifact-free: 4 seconds. Core: 482.63 Mhz Memory: 394.00 Mhz
2006-11-01 23:27:00 Find Max Core started...
2006-11-01 23:27:04 Clocks set to: 483.30 / 396.00
2006-11-01 23:27:07 Clocks set to: 483.75 / 396.00
2006-11-01 23:27:10 Clocks set to: 484.07 / 396.00
2006-11-01 23:27:13 Clocks set to: 486.00 / 396.00
2006-11-01 23:27:15 Scan aborted. Total runtime: 15 seconds. Artifact-free: 15 seconds. Core: 485.13 Mhz Memory: 396.00 Mhz
2006-11-01 23:27:18 Application terminated.
2006-11-01 23:27:51 ATITool v0.25 Beta 10 started.
2006-11-01 23:27:51 D Successfully connected to driver, version 123
2006-11-01 23:27:51 D Found ATI device: 0x1002 0x71CE bus 2 dev 0
2006-11-01 23:27:51 D fbPhy: 0xE0000000, mmrPhy: 0xFDBF0000.
2006-11-01 23:27:51 D mmapped mmr to 0xCF0000
2006-11-01 23:27:51 D BIOS at 0xC0000
2006-11-01 23:27:51 D mmapped bios to 0xD00000
2006-11-01 23:27:51 D GB_TILE_CONFIG:1410011
2006-11-01 23:27:51 D 4 pipes
2006-11-01 23:27:51 D Temperature monitoring: Not supported
2006-11-01 23:27:51 D VT1103 chip detection: failed (0x0)
2006-11-01 23:27:51 D Device initialized successfully
2006-11-01 23:28:02 Find Max Memory started...
2006-11-01 23:28:04 Artifacts detected after 00:00.00. 6198 pixels don't match.
2006-11-01 23:28:05 Clocks set to: 486.00 / 391.50
2006-11-01 23:28:05 Artifacts detected after 00:01.01. 6198 pixels don't match.
2006-11-01 23:28:06 Clocks set to: 486.00 / 387.00
2006-11-01 23:28:07 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:28:07 Clocks set to: 486.00 / 382.50
2006-11-01 23:28:07 Scan aborted. Total runtime: 3 seconds. Artifact-free: 1 seconds. Core: 486.00 Mhz Memory: 384.50 Mhz
2006-11-01 23:28:09 Find Max Memory started...
2006-11-01 23:28:13 Clocks set to: 486.00 / 387.00
2006-11-01 23:28:16 Clocks set to: 486.00 / 391.50
2006-11-01 23:28:19 Clocks set to: 486.00 / 396.00
2006-11-01 23:28:22 Clocks set to: 486.00 / 400.50
2006-11-01 23:28:25 Clocks set to: 486.00 / 405.00
2006-11-01 23:28:28 Clocks set to: 486.00 / 409.50
2006-11-01 23:28:29 Scan aborted. Total runtime: 19 seconds. Artifact-free: 19 seconds. Core: 486.00 Mhz Memory: 407.50 Mhz
2006-11-01 23:28:30 Application terminated.
2006-11-01 23:32:17 ATITool v0.25 Beta 10 started.
2006-11-01 23:32:18 D Successfully connected to driver, version 123
2006-11-01 23:32:18 D Found ATI device: 0x1002 0x71CE bus 2 dev 0
2006-11-01 23:32:18 D fbPhy: 0xE0000000, mmrPhy: 0xFDBF0000.
2006-11-01 23:32:18 D mmapped mmr to 0xCF0000
2006-11-01 23:32:18 D BIOS at 0xC0000
2006-11-01 23:32:18 D mmapped bios to 0xD00000
2006-11-01 23:32:18 D GB_TILE_CONFIG:1410011
2006-11-01 23:32:18 D 4 pipes
2006-11-01 23:32:18 D Temperature monitoring: Not supported
2006-11-01 23:32:18 D VT1103 chip detection: failed (0x0)
2006-11-01 23:32:18 D Device initialized successfully
2006-11-01 23:32:21 Find Max Memory started...
2006-11-01 23:32:23 Artifacts detected after 00:00.00. 6198 pixels don't match.
2006-11-01 23:32:24 Clocks set to: 546.75 / 387.00
2006-11-01 23:32:24 Artifacts detected after 00:01.01. 6198 pixels don't match.
2006-11-01 23:32:25 Clocks set to: 546.75 / 382.50
2006-11-01 23:32:25 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:32:26 Clocks set to: 546.75 / 378.00
2006-11-01 23:32:26 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:32:27 Clocks set to: 546.75 / 373.50
2006-11-01 23:32:27 Artifacts detected after 00:01.00. 6198 pixels don't match.
2006-11-01 23:32:28 Clocks set to: 546.75 / 369.00
2006-11-01 23:32:28 Scan aborted. Total runtime: 5 seconds. Artifact-free: 1 seconds. Core: 546.75 Mhz Memory: 371.00 Mhz
2006-11-01 23:32:30 Application terminated.

I really have no idea what's going on, and I know that this card is overclockable becuase the member [FH415] LOKI said that he OCed his to a core speed of 640 MHz.
I have a Sapphire X1300XT card running Catalyst 6.10 (Unmodded), and I've uninstalled it twice, the second time using drivercleaner from driverheaven.
Also, under the Catalyst Control Center, I have Overdrive unlocked for the Temp monitor, but I haven't touched the OC controls since the first install. Amazingly enough, the requested core speed is 547 MHz, whereas the stock is 500MHz and this is what the requested box says. The memory clock speeds are at stock speed also. Please help me I'm very frustrated!!!!!!
PWNzershreck
(15 items)
 
  
CPUMotherboardGraphicsRAM
4930K @ 4.6 GHz ASUS Rampage IV Black Edition MSI GTX 1080 FE Heatkiller Acetal 16 GB Corsair Vengeance 1600C9 
Hard DriveOptical DriveCoolingOS
2x Samsung 840 Pro  ASUS DVD-RW SATA Koolance 380i & 2x HW Labs 480GTX Arch Linux x86_64, Windows 7 x64 
MonitorKeyboardPowerCase
LG UC88-B Ultrawide, ASUS VS278Q Ducky Corsair AX1200i Caselabs STH10 
MouseMouse PadAudio
Logitech G500 Func 1030 ASUS Xonar Essence STX 
  hide details  
Reply
PWNzershreck
(15 items)
 
  
CPUMotherboardGraphicsRAM
4930K @ 4.6 GHz ASUS Rampage IV Black Edition MSI GTX 1080 FE Heatkiller Acetal 16 GB Corsair Vengeance 1600C9 
Hard DriveOptical DriveCoolingOS
2x Samsung 840 Pro  ASUS DVD-RW SATA Koolance 380i & 2x HW Labs 480GTX Arch Linux x86_64, Windows 7 x64 
MonitorKeyboardPowerCase
LG UC88-B Ultrawide, ASUS VS278Q Ducky Corsair AX1200i Caselabs STH10 
MouseMouse PadAudio
Logitech G500 Func 1030 ASUS Xonar Essence STX 
  hide details  
Reply
post #2 of 36
Get a newer version of ATITool. I use Beta 14 myself, which works good for me. The newest is Beta 16, which I have not tried (note: stay away from Beta 15, since it's buddy as #%#^!@)
    
CPUMotherboardGraphicsRAM
E8400 @ 3.8 GHz DFI LANPARTY DK X38-T2R eVGA 8400GS 2GB Mushkin DDR2 800 (single stick) 
Hard DriveOptical DriveOSMonitor
250GB WD SATA None Windows XP Pro 32-bit HP Pavilion f1703 
KeyboardPowerCaseMouse
N/A Corsair HX520 Coolermaster Cavalier N/A 
Mouse Pad
N/A 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8400 @ 3.8 GHz DFI LANPARTY DK X38-T2R eVGA 8400GS 2GB Mushkin DDR2 800 (single stick) 
Hard DriveOptical DriveOSMonitor
250GB WD SATA None Windows XP Pro 32-bit HP Pavilion f1703 
KeyboardPowerCaseMouse
N/A Corsair HX520 Coolermaster Cavalier N/A 
Mouse Pad
N/A 
  hide details  
Reply
post #3 of 36
it'd be nice if someone tested 16....
Monster Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 P5K Deluxe 3870 2X1GB Geil 800 MHz 
Hard DriveOptical DriveOSMonitor
4 x 250 barracuda's 2 x DVD Writers Windows 7 22" Acer LCD 
KeyboardPowerCaseMouse
Razor 600W GameXStream TT Armor Modded Razor 
  hide details  
Reply
Monster Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 P5K Deluxe 3870 2X1GB Geil 800 MHz 
Hard DriveOptical DriveOSMonitor
4 x 250 barracuda's 2 x DVD Writers Windows 7 22" Acer LCD 
KeyboardPowerCaseMouse
Razor 600W GameXStream TT Armor Modded Razor 
  hide details  
Reply
post #4 of 36
Seems like no one dares after the Beta 15 debacle
    
CPUMotherboardGraphicsRAM
E8400 @ 3.8 GHz DFI LANPARTY DK X38-T2R eVGA 8400GS 2GB Mushkin DDR2 800 (single stick) 
Hard DriveOptical DriveOSMonitor
250GB WD SATA None Windows XP Pro 32-bit HP Pavilion f1703 
KeyboardPowerCaseMouse
N/A Corsair HX520 Coolermaster Cavalier N/A 
Mouse Pad
N/A 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8400 @ 3.8 GHz DFI LANPARTY DK X38-T2R eVGA 8400GS 2GB Mushkin DDR2 800 (single stick) 
Hard DriveOptical DriveOSMonitor
250GB WD SATA None Windows XP Pro 32-bit HP Pavilion f1703 
KeyboardPowerCaseMouse
N/A Corsair HX520 Coolermaster Cavalier N/A 
Mouse Pad
N/A 
  hide details  
Reply
post #5 of 36
Thread Starter 
All right I'm about to give beta 16 a spin if I can find it.....I was using beta 10 from Guru3d.com, which suprises me becuase they usually have good downloads. I'll let you guys know how it goes, but I doubt it will work becuase things are kinda screwey since I got this new card. My games run fine though. Go figure!
PWNzershreck
(15 items)
 
  
CPUMotherboardGraphicsRAM
4930K @ 4.6 GHz ASUS Rampage IV Black Edition MSI GTX 1080 FE Heatkiller Acetal 16 GB Corsair Vengeance 1600C9 
Hard DriveOptical DriveCoolingOS
2x Samsung 840 Pro  ASUS DVD-RW SATA Koolance 380i & 2x HW Labs 480GTX Arch Linux x86_64, Windows 7 x64 
MonitorKeyboardPowerCase
LG UC88-B Ultrawide, ASUS VS278Q Ducky Corsair AX1200i Caselabs STH10 
MouseMouse PadAudio
Logitech G500 Func 1030 ASUS Xonar Essence STX 
  hide details  
Reply
PWNzershreck
(15 items)
 
  
CPUMotherboardGraphicsRAM
4930K @ 4.6 GHz ASUS Rampage IV Black Edition MSI GTX 1080 FE Heatkiller Acetal 16 GB Corsair Vengeance 1600C9 
Hard DriveOptical DriveCoolingOS
2x Samsung 840 Pro  ASUS DVD-RW SATA Koolance 380i & 2x HW Labs 480GTX Arch Linux x86_64, Windows 7 x64 
MonitorKeyboardPowerCase
LG UC88-B Ultrawide, ASUS VS278Q Ducky Corsair AX1200i Caselabs STH10 
MouseMouse PadAudio
Logitech G500 Func 1030 ASUS Xonar Essence STX 
  hide details  
Reply
post #6 of 36
I use Beta 16 and have no issues whatsoever.
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
post #7 of 36
Try ATI Tray Tools instead of ATI Tool.
    
CPUMotherboardGraphicsRAM
E6600 Conroe Asus P5B Deluxe Wi/Fi Powercolor 3850's 512 CF 2 Gig DDR2 800 
Hard DriveOSMonitorKeyboard
WD 320 sata2 Vista ultimate x86 Syncmaster 710v Microsoft Natural PS/2 
PowerCaseMouse
GTR 600 TTSoprano RS100 Full Tower PS/2 Laser 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E6600 Conroe Asus P5B Deluxe Wi/Fi Powercolor 3850's 512 CF 2 Gig DDR2 800 
Hard DriveOSMonitorKeyboard
WD 320 sata2 Vista ultimate x86 Syncmaster 710v Microsoft Natural PS/2 
PowerCaseMouse
GTR 600 TTSoprano RS100 Full Tower PS/2 Laser 
  hide details  
Reply
post #8 of 36
No. The best way is to use ATI tool to overclock and ATI Tray Tool for your graphics settings. Just Disable the overclocking option on ATI Tray Tool when you install it
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
post #9 of 36
I sugested tray tool because it has an oc function nearly identical to ati tool.His version of ati tool is obviously not working the way it used to.
    
CPUMotherboardGraphicsRAM
E6600 Conroe Asus P5B Deluxe Wi/Fi Powercolor 3850's 512 CF 2 Gig DDR2 800 
Hard DriveOSMonitorKeyboard
WD 320 sata2 Vista ultimate x86 Syncmaster 710v Microsoft Natural PS/2 
PowerCaseMouse
GTR 600 TTSoprano RS100 Full Tower PS/2 Laser 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E6600 Conroe Asus P5B Deluxe Wi/Fi Powercolor 3850's 512 CF 2 Gig DDR2 800 
Hard DriveOSMonitorKeyboard
WD 320 sata2 Vista ultimate x86 Syncmaster 710v Microsoft Natural PS/2 
PowerCaseMouse
GTR 600 TTSoprano RS100 Full Tower PS/2 Laser 
  hide details  
Reply
post #10 of 36
People get different results with different software but after a lot of research I found that ATI Tool is best for overclocking (25b16pre5) and Tray Tools takes care of all my graphics settings
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Drivers and Overclocking Software › ATItool won't work