Just built my new WC loop. Getting some pretty high cpu temps. Running a 2600K at 4.8 and 1.42 volts with an RX480, Black Ice Stealth GT 240, MP655 (dial set on 5), swiftech apogee hd, and a gtx 680 with koolance fc block.
Basically around 68C during prime95 load.
That seems really high for a custom loop like this. My H100 wasnt much worse. Ive repasted 3 times with different stuff but still seems to run pretty hot. My ambients are around 22-23C. My GPU runs at around 33C during load so I dont think there is too much air in the system unless its trapped in the swiftech block some how. I do have a 90 degree fitting on the rad right before the cpu block but I dont think that would mater too much.
Heres my build log:
http://www.overclock.net/t/1281073/my-first-wc-build-black-tj07
< See avatar for another picture.
Please, any help or suggestions are much appreciated. Thanks!
Edited by hammerforged - 7/20/12 at 12:34pm
Basically around 68C during prime95 load.
That seems really high for a custom loop like this. My H100 wasnt much worse. Ive repasted 3 times with different stuff but still seems to run pretty hot. My ambients are around 22-23C. My GPU runs at around 33C during load so I dont think there is too much air in the system unless its trapped in the swiftech block some how. I do have a 90 degree fitting on the rad right before the cpu block but I dont think that would mater too much.
Heres my build log:
http://www.overclock.net/t/1281073/my-first-wc-build-black-tj07
< See avatar for another picture.
Please, any help or suggestions are much appreciated. Thanks!
Edited by hammerforged - 7/20/12 at 12:34pm
TJ07
(18 items) | 
|
|
TJ07
(18 items) |
|
)
