Originally Posted by andyv
What's the best method to clean out the system before using mayhems? Currently running distilled and silver.
I ran boiling water and a bit of vinegar through my rads. 1 part vin to 10 parts water. Cleaned all my fittings and acrylic tubing by soaking them then rinsing with distilled water. Put system together and ran some distilled then drained and added coolant.
Wouldve been fine if I had used the right right type of water which isn't distilled.
Everyone has there own way of cleaning just take your time.
Originally Posted by _REAPER_
Is there a grey or dark grey coolant in the works?
Mix white and black together.
Originally Posted by OPanda
So can I use distilled water or not? This should be stated very clearly in the first post, especially if using distilled water (for some reason) is going to mess up my pastel.
DO NOT use distilled. Only deionized. I read Di on the bottled and assumed it was distilled. I had an extremely flushed and clean system. At least my coolant reacted badly with distilled. Anyways this was supposed to be Pastel Pure Black.Edited by Solonowarion - 6/9/13 at 3:16pm