with the purchase of a corsair obsidian 800d a month ago i thought i might as well upgrade my water loop. so since then I've been gathering funds and designing the loop. and I've come to the final design and id like opinions about it.
I already own a Koolance 420mm rad and all of the fans i would need for 1 420 rad, 1 140 rad, and the case itself.
From frozencpu.com ill be ordering:
This is how its looking like it will be layed out.
res>pump>140 rad>cpu>420 rad>gpu>res
the fillport comes off the top of the res and the drain port comes off the pump which is the lowest point on the loop
now there are a few things that i havent quite figured out yet. ive been using primochill tubing and their coolant and was wondering if there was anything better out there. thanks for the help in advance
I already own a Koolance 420mm rad and all of the fans i would need for 1 420 rad, 1 140 rad, and the case itself.
From frozencpu.com ill be ordering:
- 1 Ek D5 x top
- 3 Ek uni holder 50/70 mount adapter
- 1 Ek- multioption res x2 100 basic
- 1 Koolance single 140mm copper high flow rad
- 14 Monsoon free center comp fitting- 7/16 ID 5/8 OD
- 5 Koolance 45 degree
- 2 koolance 90 degree
- 2 danger den fill ports
- 1 Koolance 370 cpu block
- 1 Koolance Gtx 680 block
This is how its looking like it will be layed out.
res>pump>140 rad>cpu>420 rad>gpu>res
the fillport comes off the top of the res and the drain port comes off the pump which is the lowest point on the loop
now there are a few things that i havent quite figured out yet. ive been using primochill tubing and their coolant and was wondering if there was anything better out there. thanks for the help in advance
Nemesis
(14 items) |
|
Nemesis
(14 items) |
