Hey all, I'm rebuilding my computer and redoing my liquid system (not putting a first one in, just updating the existing one for new components and such)..
Right now i have the Swiftech MCP355, and it's done a good job thus far, but I don't know if it's doing "as good of a job as i need it to". Right now my loop goes from the pump, to the CPU, to the GPU, then to a 2x120mm radiator, back to the reservoir and back to the pump.. The loop im redoing is going to be the same.. pump>cpu>gpu>radiator>reservoir>pump.. I was just curious if there's any benefit to getting a bigger pump vs keeping this one, which is doing its job admirably.

http://i.imgur.com/6Lvly.jpg
it's going to look prettier than that when i'm done with it.. i'm making a mount so i can raise the pump up so the hose won't be so long and doing some other stuff too
Right now i have the Swiftech MCP355, and it's done a good job thus far, but I don't know if it's doing "as good of a job as i need it to". Right now my loop goes from the pump, to the CPU, to the GPU, then to a 2x120mm radiator, back to the reservoir and back to the pump.. The loop im redoing is going to be the same.. pump>cpu>gpu>radiator>reservoir>pump.. I was just curious if there's any benefit to getting a bigger pump vs keeping this one, which is doing its job admirably.

http://i.imgur.com/6Lvly.jpg
it's going to look prettier than that when i'm done with it.. i'm making a mount so i can raise the pump up so the hose won't be so long and doing some other stuff too












