Overclock.net banner

"Red Dawn Demon" Corsair 900D / Quad 7950's/ Extreme Custom Water-Cooling Loop!/ 5ghz 8350!/ 44 120mm Fan's!

83K views 1K replies 62 participants last post by  kkehlet 
#1 ·
#12 ·
Quote:
Originally Posted by bburrill2012 View Post

I been thinking about getting the Cooler Master HAF because the fans it came with are quiet (or at least advertised as quiet, no fan over 19dBA and the CFM ratings are 110 on 3 of them.
How are the fans dBA's and CFMs on the Black Hawk Ultra?
fans in this case are quiet i dident even hear theme and i still don't
 
#15 ·
okay so i was bored so decided to custom mount my HDD and paint theme with heat resident paint (has like sand in it for tuff look)
this is the starting point got to take off that damn sticker
sticker is off
typeing off the back so no paint gets there
500 grit paper and skuff pad so i can get the paint to stick to it
 
#17 ·
started painting it
dont like the paint it has like sand in it but it gives it tuff look
ehh not to shabby
shiny xD
like i said it has like a sand in it but its okay its all ruff now lol military grade xDDDDDDDDDD
thumb.gif
 
#20 ·
Quote:
Originally Posted by Adrenaline View Post

Looks Good Subbed Also I like the Idea of Paining the HDD's Black
thumb.gif
thanks so much for the sub I shall not fail you
biggrin.gif
huge water-cooling set-up as U can see up there ^ and thanks I had nothing to do so yea
biggrin.gif
 
#21 ·
Will a 1080 rad mount in that case? Or is that one of the planned mods?

Either way it looks like a badass build mate
thumb.gif
 
#22 ·
Quote:
Originally Posted by Vengeance47 View Post

Will a 1080 rad mount in that case? Or is that one of the planned mods?
Either way it looks like a badass build mate
thumb.gif
well i can do 4 ways

1 rad stand (outside case )
2 side panel has x9 120mm fans but i wanna put window there
3 other side panel 4 m4 screws lifted off from side panel
4 mounted underneath desk

what do you think?
 
#23 ·
Quote:
Originally Posted by REPUBLICOFGAMER View Post

well i can do 4 ways
1 rad stand (outside case )
2 side panel has x9 120mm fans but i wanna put window there
3 other side panel 4 m4 screws lifted off from side panel
4 mounted underneath desk
what do you think?
Personally, I would love to see a mod using the rear panel, behind the motherboard tray. Make a custom 1080 rad mount and integrate the rad behind the motherboard tray then use 90 degree fittings to keep the tubing straight and clean along with some 45's to route the tubing?

Although that would depend on your skills with sheet metal and welding I guess. Since you would need to cut out a section of the existing panel and then essentially extrude the rad mount to allow enough clearance from the motherboard tray to allow for the rad + fans + room to route tubing. But I think it would be an awesome mod if you could do something like that.

Otherwise I would probably just use a rad stand although I think they don't look anywhere near as impressive as completely internal builds
thumb.gif
 
#24 ·
Quote:
Originally Posted by Vengeance47 View Post

Personally, I would love to see a mod using the rear panel, behind the motherboard tray. Make a custom 1080 rad mount and integrate the rad behind the motherboard tray then use 90 degree fittings to keep the tubing straight and clean along with some 45's to route the tubing?
Although that would depend on your skills with sheet metal and welding I guess. Since you would need to cut out a section of the existing panel and then essentially extrude the rad mount to allow enough clearance from the motherboard tray to allow for the rad + fans + room to route tubing. But I think it would be an awesome mod if you could do something like that.
Otherwise I would probably just use a rad stand although I think they don't look anywhere near as impressive as completely internal builds
thumb.gif
be happy you sub'd ! cause you gave me an idea!
 
#26 ·
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top