About a month ago i decided i wanted a benchtable. Not because i'm such a big bencher or i change my hardware that often, but because i just liked the look of an open case or a test bench. I did some research on what would be a good benchtable for me to put my hardware at.
Eventually i bumped in to the Little Devil PC-V4. A beautifull bench table with lots of possibilitys. I decided to buy the case and measure the inners for a WC setup. And so i did.. and i started the build.
First of al i made a BEAUTIFULL sketch
I ordered the table and got it the next day
After that, i started measuring every place i wanted to have a piece of hardware or some WC parts. Eventually i went with:
After everything was in, it was time to start the build.
Because i didnt want to have my benchtable laying flat at my desk or standing up straight, i decided i was going to make a stand for the benchtable.
After the build was finished, i noticed the sound of the fans at my rad were pretty loud and i decided i needed a fan controller. I went for a perfect little Zalman controller, wich i eventually modified into the case.
The spec list i ended up with:
Intel i7 3930K C2
Asus Rampage IV Formula
Asus GTX680 DCUII TOP SLI
Swiftech Apogee Drive II
EK Multi X2 reservoir
EK Coolstream XTX 360 radiator
EK clambs
Tygon hoses
Corsair SP120 fans
Corsair Dominator 1866 16GB
Corsair Force GT 120GB
Corsair AX1200
After everything was done, i painted the stand for the table and secured everything.
After that, i was quite happy with the result.
And this is how it stands in my room now
Edited by Arniebomba - 8/2/12 at 10:21am
Eventually i bumped in to the Little Devil PC-V4. A beautifull bench table with lots of possibilitys. I decided to buy the case and measure the inners for a WC setup. And so i did.. and i started the build.
First of al i made a BEAUTIFULL sketch
I ordered the table and got it the next day
After that, i started measuring every place i wanted to have a piece of hardware or some WC parts. Eventually i went with:
After everything was in, it was time to start the build.
Because i didnt want to have my benchtable laying flat at my desk or standing up straight, i decided i was going to make a stand for the benchtable.
After the build was finished, i noticed the sound of the fans at my rad were pretty loud and i decided i needed a fan controller. I went for a perfect little Zalman controller, wich i eventually modified into the case.
The spec list i ended up with:
Intel i7 3930K C2
Asus Rampage IV Formula
Asus GTX680 DCUII TOP SLI
Swiftech Apogee Drive II
EK Multi X2 reservoir
EK Coolstream XTX 360 radiator
EK clambs
Tygon hoses
Corsair SP120 fans
Corsair Dominator 1866 16GB
Corsair Force GT 120GB
Corsair AX1200
After everything was done, i painted the stand for the table and secured everything.
After that, i was quite happy with the result.
And this is how it stands in my room now
Edited by Arniebomba - 8/2/12 at 10:21am
- A.B.C -
(12 items) |
|
- A.B.C -
(12 items) |
(bottom and back) Offcourse i dont want this to fall down anytime 
Do you plan on putting blocks on your DCIIs? I know EK makes blocks for them.
