Is there a way to max at 1.187500v instead of just 1.21? Every time I try unlocking my bios with kgb with the # before the 1.187500 value deleted, and all the others filled in, it still maxes at 1.21 under AB and Precision... It even says in the command line that it set it to max at the 1.187500
Here is my KGB file if you guys can see anything wrong with it.Warning: Spoiler! (Click to show)
# Fan settings
Fan_Min = 30
Fan_Max = 100
# Board power settings
Max_Power_Target = 150
# The following are valid voltages. I suggest you
# use these values rather than coming up with your
# own. 1212500 is the max and it is normally hard limited.
# If you go over the max and your board is hard limited
# you may actually get a much lower voltage than you
# Voltage = 1212500
# Voltage = 1200000
Voltage = 1187500
# Voltage = 1175000
# Voltage = 1162500
# Voltage = 1150000
And here is an attachment of my stock BIOS from a backup if anyone wants to try messing with it.
BACKUP.zip 55k .zip file
Maybe it has something to do with the Windforce 3X using a 680 PCB?