Overclock.net › Forums › Graphics Cards › NVIDIA › GTX 600 Series Unlocked Voltage Bios' downloads and tools.
New Posts  All Forums:Forum Nav:

GTX 600 Series Unlocked Voltage Bios' downloads and tools. - Page 742

post #7411 of 7931
Quote:
Originally Posted by djthrottleboi View Post

good point and noted. lol i forgot you posted that.

Long story short, this is OCN, let's try to keep this site an informative place rather than a place where the lazies get their stuff done.
I was nearly joking about that... sen i have to go to work so dindnt have the time to check it out. I will always like to learn my self... And all is good now i figure it out about the sowftware it was like taking a candy from a baby. smile.gif
post #7412 of 7931
Quote:
Originally Posted by harrinus View Post

I was nearly joking about that... sen i have to go to work so dindnt have the time to check it out. I will always like to learn my self... And all is good now i figure it out about the sowftware it was like taking a candy from a baby. smile.gif

I wasn't referring to you or anyone when I said that..

Lol

It's easy to tweak actually..But there's not enough info on the functions or parameters on 1.27..

But if you are like me, you can just take a bios of another higher model card and copy the parameters. Give some bump and try..

Be sure to share what you can find..
post #7413 of 7931
Quote:
Originally Posted by mus1mus View Post


I wasn't referring to you or anyone when I said that..

Lol

It's easy to tweak actually..But there's not enough info on the functions or parameters on 1.27..

But if you are like me, you can just take a bios of another higher model card and copy the parameters. Give some bump and try..

Be sure to share what you can find..

kepler bios tweaker is straight forward and if you oc then you will know the basics. So every option in it is very straightforward. I want to pecil shade my resister on my gigabyte card and see if that allows me to oc or will it cause problems as i dont have a soldering gun and wire

throttlemeister
(30 items)
 
  
CPUMotherboardRAMHard Drive
i7-4790k gigabyte GA-Z97X-Gaming G1 WIFI-BK corsair vengeance 2x8 1866Mhz seagate barracuda 
Hard DriveHard DriveHard DriveHard Drive
seagate barracuda  seagate barracuda seagate barracuda seagate barracuda 
Hard DriveOptical DriveCoolingCooling
Crucial M500 SSD random dvd multirecorder / cd drive fast sata 6... ex240 rad xspc ax240 kit 
CoolingCoolingCoolingOS
3 140mm fans plus 6 120mm fans Arctic Cooling MX4 4g Thermal Paste XSPC EX360 crossflow windows 8.1 pro 
OSOSMonitorKeyboard
ZorinOS Mac Os X Yosemite Monoprice MPCP28UHD logitech g510s 
PowerCaseMouseMouse Pad
evga supernova 1300 g2 Corsair 900D logitech g500s none  
AudioAudioAudioOther
Logitech X-540 5.1 Surround Sound Speaker w/ su... diamond xtreme sound XS71U Logitech H390 Headset xbox 360 wireless 
OtherOther
logitech c110 webcam logitech driving force gt 
  hide details  
Reply
throttlemeister
(30 items)
 
  
CPUMotherboardRAMHard Drive
i7-4790k gigabyte GA-Z97X-Gaming G1 WIFI-BK corsair vengeance 2x8 1866Mhz seagate barracuda 
Hard DriveHard DriveHard DriveHard Drive
seagate barracuda  seagate barracuda seagate barracuda seagate barracuda 
Hard DriveOptical DriveCoolingCooling
Crucial M500 SSD random dvd multirecorder / cd drive fast sata 6... ex240 rad xspc ax240 kit 
CoolingCoolingCoolingOS
3 140mm fans plus 6 120mm fans Arctic Cooling MX4 4g Thermal Paste XSPC EX360 crossflow windows 8.1 pro 
OSOSMonitorKeyboard
ZorinOS Mac Os X Yosemite Monoprice MPCP28UHD logitech g510s 
PowerCaseMouseMouse Pad
evga supernova 1300 g2 Corsair 900D logitech g500s none  
AudioAudioAudioOther
Logitech X-540 5.1 Surround Sound Speaker w/ su... diamond xtreme sound XS71U Logitech H390 Headset xbox 360 wireless 
OtherOther
logitech c110 webcam logitech driving force gt 
  hide details  
Reply
post #7414 of 7931

I am posting this because i just explained kepler bios tweaker 1.27 and i do not want to do so again as there is a lot. these are the basics and thes questions were referring to a 700 series card but i am sure any who takes the time to look can get the idea pretty quick of whats being said:

 

Quote:
Originally Posted by ANJULE View Post

Nice to see that you have the time to help. Thank you for that wave2.gif
Here is some questions more, since I still don't fully grasp this KBT (version 1.27)
(I list here what I see, if i don't get it)
-Common tab:
TDP Base Entry: Entry #1 (selectable list from Entry #0 to Entry #2 and disabled)
3D Base Entry: Entry #2 (selectable list from Entry #0 to Entry #2 and disabled)
Boost Entry: Entry #0 (selectable list from Entry #0 to Entry #2 and disabled)

Dont really get those "Entry #x" -things or the affect of changeing them.
Any experiance from editing them, or the meaning of them?

-Voltage Table:
P16,P16: 1137.5mV - 1300.0mV
What does this do? Is this the gap where the voltage can change according clockrate?

After that there are 4lines without any explanation, or front header:
.0mV - 1225.0mV
1237.5mV - 1300.0mV
.0mV - .0mV
.0mV - .0mV
So what are those very un-logical numbers?


Then there are P00 with 6 lines, and the 5th line has values .0mV - 887.5mV. Others are 0mV

After that P08 has only 1 line, values 0mV - 0mV

Then there are more interesting lines, their front-headers can be found from "Boost Table".
CLK 00,01,02,03,04,05: .0mV - .0mV
CLK 06: .0mV - .0mV
CLK 07: .0mV - 862.5mV
CLK 08: .0mV - .0mV
CLK 09: .0mV - 875.0mV
CLK 10: .0mV - 875.0mV
CLK 11: .0mV - .0mV

These continue to the CLK 63 (61-63 has 0.0mV), with random .0mV's
After CLK 63 there are two lines .0mV - .0mV and 1200.0mV - 1200.0mV

-Power Table has maximum pci-e lane outage of 38,5W

-Boost Table seem to cave Boost-rates for every Voltage-Table -value.
Line 00: green background
Lines 01-05: white background
Lines 06-62: yellow backgound
Line 63: green background
Line 64: white backgound
And it has a slider for Max Table Clock

I've read somewhere that the colours of this table determines the usable clockrates, but how to change it?

-Boost States has
P00 - Profile with GPC, L2C, XBAR and SYS frontheaders with Min. and Max. values
P08 - Profile has the same, but values are smaller

-Clock States has
P00 - Profile with the GPC, XBAR, L2C, DDR, SYS, HUB, MSD, PWR, DISP -values.
First five of them are on yellow backgound an last four are on white background

P08 - Profile has the same places with smaller vaues and all of the backgrounds are white

So I see some consistency between the tabs but, I'm not sure what to modify and how much. Neither I know anything about those values.

I'd be super-happy if someone could help me.

 

I will Break these down and then you can do more research as i am a user just like you i am not any more knowledgeable in this than you are but here is the basics.

 

Quote:

Dont really get those "Entry #x" -things or the affect of changeing them.
Any experiance from editing them, or the meaning of them?


 

 

Ok starting with the common tab. Those are your clocks. tdp is your base clock which is the default clock for when you are running everything like games and all it is just default.

3D base is the clocks 3D performance clock and when your card throttles this reverts to the TDP Base clock setting. 3D clock is primarily used for 3d apps and games that use 3d but it isn't neccessary. if you notice most cards tend to set this to the same as the TDP base clock probably because they are cutting it close on power anyway. Boost clock is the clock that boost will start at. and it will boost from there to as high as it can go. As long as boost is active it will sit at this clock setting as a minimum if it cannot go higher. The entry sections are preset values that can be found in the bios. There is 0,1,2  and each is originally meant to be assigned to each clock setting but as 3D base isn't used much and is usually assigned  the same value as TDP base clock the bios tends to only use 2. You can apply the third value and then oc it so that you have 3 different clock rates not counting the extra MHz that boost will pull.


 

Quote:

-Voltage Table:

P16,P16: 1137.5mV - 1300.0mV

What does this do? Is this the gap where the voltage can change according clockrate?

 

yes as the value to the left represents minimum max voltage and the value to the right represents maximum max voltage. What this means is that to use the card the way its meant to be used it can draw up to 1300.0mV but it must be able to draw at least 1137.5mV to be functional. In the bios there are voltage requirements and this is one. Without this voltage this card might not start and can possibly damage itself.

 

Quote:
Then there are P00 with 6 lines, and the 5th line has values .0mV - 887.5mV. Others are 0mV

After that P08 has only 1 line, values 0mV - 0mV

 

The voltage sliders with P-states like P00 or P08 are your performance states. in gtx 660's they have only 4 performance states. P00, p02, p05, p08, in which they eact states a power setting. P00 is the maximum performance state and p08 is the low power state. I assume you have a 700 series card by your number of power states and that makes sense with the power targets and the temp targets and boost 2.0 you basically will have a lot more power states linked, hence the multiple lines in p00. The left sliders represent minimum voltage and the right sliders represent maximum voltage.


 

Quote:

Then there are more interesting lines, their front-headers can be found from "Boost Table".

CLK 00,01,02,03,04,05: .0mV - .0mV
CLK 06: .0mV - .0mV
CLK 07: .0mV - 862.5mV
CLK 08: .0mV - .0mV
CLK 09: .0mV - 875.0mV
CLK 10: .0mV - 875.0mV
CLK 11: .0mV - .0mV    
 
 

These represent the voltage requirements for each clock. Again the left sliders represent minimum voltage and the right sliders represent maximum voltage. All the values that have no name or description will be revealed in the next kbt i am sure. I think when this was made it was made before he had the chance to properly figure out what those values are. The slots 61-63 are probably intended to be only boost states and that why they have a any voltage requirement.


 

Quote:

-Power Table has maximum pci-e lane outage of 38,5W

 

The power table has multiple settings for the rails and the pcie slot as well as the tdp and power target. It is up to you to change these values but these values are specific to each card so you will need to do research to find out more about these values for your card specifically.

 

Quote:

-Boost Table seem to cave Boost-rates for every Voltage-Table -value.

Line 00: green background
Lines 01-05: white background
Lines 06-62: yellow backgound
Line 63: green background
Line 64: white backgound

And it has a slider for Max Table Clock

 

Yes The boost states affect each setting for you cards clocks. Remember those voltage table settings? With this you can decide which clock speed gets assigned to which slot. So in my boost table my slot 41 is assigned to 1215MHz i can adjust the max table slider to assign that clock speed to number 38. This causes major instability if not done right though so i would advise caution and recommend not touching this.


 

Quote:

-Boost States has

P00 - Profile with GPC, L2C, XBAR and SYS frontheaders with Min. and Max. values
P08 - Profile has the same, but values are smaller


-Clock States has

P00 - Profile with the GPC, XBAR, L2C, DDR, SYS, HUB, MSD, PWR, DISP -values.
First five of them are on yellow backgound an last four are on white background

P08 - Profile has the same places with smaller vaues and all of the backgrounds are white


So I see some consistency between the tabs but, I'm not sure what to modify and how much. Neither I know anything about those values.

 

 

you need not change any of these values. As you make the changes to the clocks on the first page these will change automatically.

 

Take this and apply it to your card.

throttlemeister
(30 items)
 
  
CPUMotherboardRAMHard Drive
i7-4790k gigabyte GA-Z97X-Gaming G1 WIFI-BK corsair vengeance 2x8 1866Mhz seagate barracuda 
Hard DriveHard DriveHard DriveHard Drive
seagate barracuda  seagate barracuda seagate barracuda seagate barracuda 
Hard DriveOptical DriveCoolingCooling
Crucial M500 SSD random dvd multirecorder / cd drive fast sata 6... ex240 rad xspc ax240 kit 
CoolingCoolingCoolingOS
3 140mm fans plus 6 120mm fans Arctic Cooling MX4 4g Thermal Paste XSPC EX360 crossflow windows 8.1 pro 
OSOSMonitorKeyboard
ZorinOS Mac Os X Yosemite Monoprice MPCP28UHD logitech g510s 
PowerCaseMouseMouse Pad
evga supernova 1300 g2 Corsair 900D logitech g500s none  
AudioAudioAudioOther
Logitech X-540 5.1 Surround Sound Speaker w/ su... diamond xtreme sound XS71U Logitech H390 Headset xbox 360 wireless 
OtherOther
logitech c110 webcam logitech driving force gt 
  hide details  
Reply
throttlemeister
(30 items)
 
  
CPUMotherboardRAMHard Drive
i7-4790k gigabyte GA-Z97X-Gaming G1 WIFI-BK corsair vengeance 2x8 1866Mhz seagate barracuda 
Hard DriveHard DriveHard DriveHard Drive
seagate barracuda  seagate barracuda seagate barracuda seagate barracuda 
Hard DriveOptical DriveCoolingCooling
Crucial M500 SSD random dvd multirecorder / cd drive fast sata 6... ex240 rad xspc ax240 kit 
CoolingCoolingCoolingOS
3 140mm fans plus 6 120mm fans Arctic Cooling MX4 4g Thermal Paste XSPC EX360 crossflow windows 8.1 pro 
OSOSMonitorKeyboard
ZorinOS Mac Os X Yosemite Monoprice MPCP28UHD logitech g510s 
PowerCaseMouseMouse Pad
evga supernova 1300 g2 Corsair 900D logitech g500s none  
AudioAudioAudioOther
Logitech X-540 5.1 Surround Sound Speaker w/ su... diamond xtreme sound XS71U Logitech H390 Headset xbox 360 wireless 
OtherOther
logitech c110 webcam logitech driving force gt 
  hide details  
Reply
post #7415 of 7931
Ok now done and get stable runs core 1189 and mem 3250 smile.gif Unlock voltage to 1.21. GTX 670 Jetstream
post #7416 of 7931
Quote:
Originally Posted by harrinus View Post

Ok now done and get stable runs core 1189 and mem 3250 smile.gif Unlock voltage to 1.21. GTX 670 Jetstream

I bet you can still push it more.. thumb.gifthumb.gifthumb.gif

My 660 is running 1280.5 on the Core and 3500 on Memory at 1.212 Volts!!! I'd say yours could topple that at least!!!
post #7417 of 7931
Nope. Mem wont rise anymore. Core can be but little up but after while starts to show artifacts
post #7418 of 7931
Quote:
Originally Posted by mus1mus View Post

I bet you can still push it more.. thumb.gifthumb.gifthumb.gif

My 660 is running 1280.5 on the Core and 3500 on Memory at 1.212 Volts!!! I'd say yours could topple that at least!!!

Nope. Mem wont rise anymore. Core can be but little up but after while starts to show artifacts. Altough i havent use 680 bios yet. I wantet find out how much i can get just whit the regular bios
Edited by harrinus - 3/16/14 at 8:26am
post #7419 of 7931
Quote:
Originally Posted by harrinus View Post

Nope. Mem wont rise anymore. Core can be but little up but after while starts to show artifacts. Altough i havent use 680 bios yet. I wantet find out how much i can get just whit the regular bios

Ok... So now im little confuse.... I have unlocked the voltage 1.21 and i can confirm that it is in use for fact. So what should i do now to get the higer clocks?
I mean that i really cant get it more higer clocks no matter what i do... So im guessing i aint doing something right
Edited by harrinus - 3/16/14 at 11:17am
post #7420 of 7931
Quote:
Originally Posted by harrinus View Post


Nope. Mem wont rise anymore. Core can be but little up but after while starts to show artifacts. Altough i havent use 680 bios yet. I wantet find out how much i can get just whit the regular bios

 

 

thats the perfect oc as the new driver impose some type of limit and you are above the average that most people get i would say be happy with that so you dont risk damaging yopur card. have you ran 3dmark11? Play some games and make sure its stable.

throttlemeister
(30 items)
 
  
CPUMotherboardRAMHard Drive
i7-4790k gigabyte GA-Z97X-Gaming G1 WIFI-BK corsair vengeance 2x8 1866Mhz seagate barracuda 
Hard DriveHard DriveHard DriveHard Drive
seagate barracuda  seagate barracuda seagate barracuda seagate barracuda 
Hard DriveOptical DriveCoolingCooling
Crucial M500 SSD random dvd multirecorder / cd drive fast sata 6... ex240 rad xspc ax240 kit 
CoolingCoolingCoolingOS
3 140mm fans plus 6 120mm fans Arctic Cooling MX4 4g Thermal Paste XSPC EX360 crossflow windows 8.1 pro 
OSOSMonitorKeyboard
ZorinOS Mac Os X Yosemite Monoprice MPCP28UHD logitech g510s 
PowerCaseMouseMouse Pad
evga supernova 1300 g2 Corsair 900D logitech g500s none  
AudioAudioAudioOther
Logitech X-540 5.1 Surround Sound Speaker w/ su... diamond xtreme sound XS71U Logitech H390 Headset xbox 360 wireless 
OtherOther
logitech c110 webcam logitech driving force gt 
  hide details  
Reply
throttlemeister
(30 items)
 
  
CPUMotherboardRAMHard Drive
i7-4790k gigabyte GA-Z97X-Gaming G1 WIFI-BK corsair vengeance 2x8 1866Mhz seagate barracuda 
Hard DriveHard DriveHard DriveHard Drive
seagate barracuda  seagate barracuda seagate barracuda seagate barracuda 
Hard DriveOptical DriveCoolingCooling
Crucial M500 SSD random dvd multirecorder / cd drive fast sata 6... ex240 rad xspc ax240 kit 
CoolingCoolingCoolingOS
3 140mm fans plus 6 120mm fans Arctic Cooling MX4 4g Thermal Paste XSPC EX360 crossflow windows 8.1 pro 
OSOSMonitorKeyboard
ZorinOS Mac Os X Yosemite Monoprice MPCP28UHD logitech g510s 
PowerCaseMouseMouse Pad
evga supernova 1300 g2 Corsair 900D logitech g500s none  
AudioAudioAudioOther
Logitech X-540 5.1 Surround Sound Speaker w/ su... diamond xtreme sound XS71U Logitech H390 Headset xbox 360 wireless 
OtherOther
logitech c110 webcam logitech driving force gt 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › GTX 600 Series Unlocked Voltage Bios' downloads and tools.