From that screen shot it looks like it is already downclocked using cool & quiet feature on the board. First thing I would do is go into BIOS and reset everything to optimal settings, and keep everything at stock speed. If that doesnt correct what ever is off, RMA the board. Something is not right with the voltage control. If that doesnt get it, then it is time to upgrade to a 9xx series board.
Also, that particular board is better suited for Athalon 2s, even though it says it can support P2s, it pushes the board too hard. Maybe a P2x2, maybe. Something to think about when you get a mATX board. If you want to run a P2, the board must have better phase power.
Edited by ericld - 8/5/12 at 9:53am
Also, that particular board is better suited for Athalon 2s, even though it says it can support P2s, it pushes the board too hard. Maybe a P2x2, maybe. Something to think about when you get a mATX board. If you want to run a P2, the board must have better phase power.
Edited by ericld - 8/5/12 at 9:53am



















