hi, having some trouble with my new ram. Everytime i boot up, its giving me a error message about overclocking and reseting everything to defaults. The new ram is 2x4gb corsair vengeance low profile, the old ram is 2x2gb g-skill trident. The timings are almost identical, the voltages are different but i changed that, and still won't post with my overclock.
here is my overclock, that i've been using without fail for about a year now.
M.I.T
advanced frequency
cpu clock -21x
qpi -auto
bclk -181
xms- -disabled
system mem multiplier - 8
memory speed -1448
pci express -auto
cpu clok -800mv
-900mv
-ops
advanced memory
xmp -disabled
mutiplier -8
performance -standard
timing -expert
channel -auto
interleaving -auto
channel a timing
9 - 9 - 9 - 24 *(left this the same as its the same for the corsair)
advanced votage
load line -enabled
cpu vcore -1.19375 V
QPI/VTT -1.190 V
PCH core -1.050 V
CPU PLL -1.8 V
Dram V -1.6 V *(changed this to 1.5V for the corsair)
everything else on auto
any help would be greatly apprieciated, I don't know what I'm missing. If I put the old ram in, it works without a hitch.
thanks
here is my overclock, that i've been using without fail for about a year now.
M.I.T
advanced frequency
cpu clock -21x
qpi -auto
bclk -181
xms- -disabled
system mem multiplier - 8
memory speed -1448
pci express -auto
cpu clok -800mv
-900mv
-ops
advanced memory
xmp -disabled
mutiplier -8
performance -standard
timing -expert
channel -auto
interleaving -auto
channel a timing
9 - 9 - 9 - 24 *(left this the same as its the same for the corsair)
advanced votage
load line -enabled
cpu vcore -1.19375 V
QPI/VTT -1.190 V
PCH core -1.050 V
CPU PLL -1.8 V
Dram V -1.6 V *(changed this to 1.5V for the corsair)
everything else on auto
any help would be greatly apprieciated, I don't know what I'm missing. If I put the old ram in, it works without a hitch.
thanks
