Originally Posted by darkphantom
Not sure what went on in the previous posts, but I'm trying to hit 5ghz on my delidded chip. Temps are thankfully down by a good bit. I'm hitting 65C on 4.7 @1.285v but I can't seem to hit 5ghz at even 1.5v! Does it really require that much more to get up there?!
I mean, I can do 4.4ghz @ 1.16v and that's a .125v~ ish difference for 300mhz....but I digress since I know the correlation is not linear.
Anyways, for those running @ 5ghz with a MVF or MVE board, mind sharing your settings?
p.s. i'm cooling with an H100
TIM: ShinEtsu X23
If 1.285v makes 4.7 Prime95 stable for 24+ hours with no Event Viewer occurrences, then based on my experience each multiplier up would be .06 to .065 more. With the notable exception of hitting the wall. Every chip has a wall and it is not always in the same place. If 5.0 isn’t working well, try 1.4 to 1.41 or so for 4.9.
I have your chip and mobo and use the settings in the guide. I use 1.41 for both my chip, but that is just a coincidence. One is 5.0 the other 4.8.
Originally Posted by vnaut
Woops. 1.16 to 1.168, manual. Also, to add, it flutuates between 1.16 and 1.168 very frequently according to CPU-Z, say every 5 seconds or so.
I assumed you meant 1.16 to 1.168 and that is normal. Software readings of vCore are estimates and will fluctuate a little.