Overclock.net › Forums › Cooling › Water Cooling › Looking to water cool - require advice/tips and suggestions please!
New Posts  All Forums:Forum Nav:

Looking to water cool - require advice/tips and suggestions please! - Page 5

post #41 of 45
Thread Starter 
I was thinking below the GPU's if it can fit, or down further below, but that will be a hassle. I really don't want to put it outside
post #42 of 45
Thread Starter 
Okay, I've gone and drawn this up a bit (still need some help, as seen in the questions below...)

This is just a draft sketch, I will get the measurements done properly later!



Questions:
1) How does the pump connect to the loop?
2) Is it drawn correctly besides the pump?
3) Do I need a second pump and or pump top?
4) Where do I put the UV Lights? (Do I use the little ones or the cathode sticks?)
5) Matter of preference, but do you think it would look good to have the hot water loops as a nice UV red-orange and the cool loops as a UV light blue?

Sorry, I know I'm asking a lot of questions, but I want to get this run and I find it fun! self-education is awesome, so thanks in advance to everyone here, I would be here without you smile.gif
Edited by davio - 8/14/12 at 3:58am
post #43 of 45
Quote:
Originally Posted by davio View Post

Okay, I've gone and drawn this up a bit (still need some help, as seen in the questions below...)
This is just a draft sketch, I will get the measurements done properly later!

Questions:
1) How does the pump connect to the loop?
2) Is it drawn correctly besides the pump?
3) Do I need a second pump and or pump top?
4) Where do I put the UV Lights? (Do I use the little ones or the cathode sticks?)
5) Matter of preference, but do you think it would look good to have the hot water loops as a nice UV red-orange and the cool loops as a UV light blue?
Sorry, I know I'm asking a lot of questions, but I want to get this run and I find it fun! self-education is awesome, so thanks in advance to everyone here, I would be here without you smile.gif

This all looks really good, and is almost exactly how I was planning mine. As for the questions I don't think I can really help you, but I am pretty sure that it would be easier to just use a pump/bay reservoir rather then a completely separate pumnp.

I don't think you will need two pumps because most of the pumps that I have seen are high flow high pressure and do an adequate job at keeping a good flow. I am no expert though so you should wait until someone who really knows what they are talking about answers all of your questions.

The UV lights is kind of up to you if you want the stick or the little ones. Personally I think the sticks look cooler and will give off a much better look, but are most likely more expensive. Like I said, its mainly up to your personal preference. The two different colored tubes might be cool, but I will most likely just stick with one color just to make it simple and to save a little bit of money. But if you want to do it I'm sure it would look cool.

Like I said earlier, I am no pro at this so waiting until someone who has experience in this to answer all your questions would probably be a good idea.
ShinigamiRig
(18 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-3770K Ivy Bridge @4.3GHz Asus P8Z77-V PRO Thunderbolt ZOTAC GeForce GTX 580 ZOTAC GeForce GTX 580 
RAMHard DriveHard DriveOptical Drive
G.SKILL Ares 32GB (4 x 8GB sticks) SAMSUNG Spinpoint F3 1TB 7200RPM Samsung Spinpoint F3 1TB 7200RPM Crucial M4 128GB SSD 
Optical DriveCoolingOSMonitor
OCZ Agility 3 AGT3-25SAT3-240G 2.5" 240GB SATA ... Corsair H100 Windows 7 64-bit Asus 24" 
MonitorPowerCase
Benq 24" COOLER MASTER Silent Pro 1200w Corsair 800D 
  hide details  
Reply
ShinigamiRig
(18 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-3770K Ivy Bridge @4.3GHz Asus P8Z77-V PRO Thunderbolt ZOTAC GeForce GTX 580 ZOTAC GeForce GTX 580 
RAMHard DriveHard DriveOptical Drive
G.SKILL Ares 32GB (4 x 8GB sticks) SAMSUNG Spinpoint F3 1TB 7200RPM Samsung Spinpoint F3 1TB 7200RPM Crucial M4 128GB SSD 
Optical DriveCoolingOSMonitor
OCZ Agility 3 AGT3-25SAT3-240G 2.5" 240GB SATA ... Corsair H100 Windows 7 64-bit Asus 24" 
MonitorPowerCase
Benq 24" COOLER MASTER Silent Pro 1200w Corsair 800D 
  hide details  
Reply
post #44 of 45
Thread Starter 
hmm interesting, okay I will wait till someone comes in and comments on this haha
post #45 of 45
Ever hear anything about this?
ShinigamiRig
(18 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-3770K Ivy Bridge @4.3GHz Asus P8Z77-V PRO Thunderbolt ZOTAC GeForce GTX 580 ZOTAC GeForce GTX 580 
RAMHard DriveHard DriveOptical Drive
G.SKILL Ares 32GB (4 x 8GB sticks) SAMSUNG Spinpoint F3 1TB 7200RPM Samsung Spinpoint F3 1TB 7200RPM Crucial M4 128GB SSD 
Optical DriveCoolingOSMonitor
OCZ Agility 3 AGT3-25SAT3-240G 2.5" 240GB SATA ... Corsair H100 Windows 7 64-bit Asus 24" 
MonitorPowerCase
Benq 24" COOLER MASTER Silent Pro 1200w Corsair 800D 
  hide details  
Reply
ShinigamiRig
(18 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-3770K Ivy Bridge @4.3GHz Asus P8Z77-V PRO Thunderbolt ZOTAC GeForce GTX 580 ZOTAC GeForce GTX 580 
RAMHard DriveHard DriveOptical Drive
G.SKILL Ares 32GB (4 x 8GB sticks) SAMSUNG Spinpoint F3 1TB 7200RPM Samsung Spinpoint F3 1TB 7200RPM Crucial M4 128GB SSD 
Optical DriveCoolingOSMonitor
OCZ Agility 3 AGT3-25SAT3-240G 2.5" 240GB SATA ... Corsair H100 Windows 7 64-bit Asus 24" 
MonitorPowerCase
Benq 24" COOLER MASTER Silent Pro 1200w Corsair 800D 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Looking to water cool - require advice/tips and suggestions please!