Actually I found that that answer so if I can get the rest of these questions answered I would be happy
2. In the hardrive cage that will now become a pump station, is it still possible to have a hard drive in there lets say above the pumps and their ek pump tops? I know there are bay resorvoirs that incorprate dual pumps on it lk the RP-452X2 Dual 5.25in Reservoir for 1-2 PMP-450/S Pumps, Rev.2.0 but this config is 34 bucks cheaper
3. I have not yet decided what fans I want. Either NZXT FZ-140mm or maybe some Akase AK-FN063 which I can't seem to find any type of test to verify Akase claims on the specs. Since the Nexxos rad works great in all ares of rpms it really broadins the choice of fans. Silent is key here no noisy fans. How would white leds look on a red spinng fan? Also since I want to keep the cost down as low as possible and the MVF has 8 4 pin fan ports I want to use that instead of a $30 fan controller. Do the D5's need a fan blowing on them to stay cool, since there is the option of having the fan blow into the pump station i'tt be easy but the prob is I have the 2 pumps with a rpm reader on it that needs to be plugged into the mobo as well so if I have 5 fans only pulling air from the rads (have read they perform best this way with only one fan) and there are 2 case fans (one rear of the case and the other at the pump station) plus the 2 pumps that means I need 9 fan ports short one port
4. Last question is what will it take to make that 420 rad fit in the top of the switch 810 case?
WOW had to fix that post did not mean a 480 rad lol
yes a 420 is what I'm afterEdited by MrGrievous - 8/11/12 at 10:24pm