This is a new 655 pump (new in that I have never ran water through it,or powered it up) but not "new in I just recieved it.I probably have had the pump at least 18 months.I was using the pump to mock up a new build.One day I could hear something rattling at the bottom of the pump.I pull off the bottom and I see the capacitor that is identified in the photo loose from the printed circuit board it was supposed to be soldered to.Suprisingly it is not immeditate as to how to fix this issue.I wonder if contacting SwifTech and offering to pay for a repair would be a good idea.If I could see a way to solder the capacitor back on I would.I ask for suggestions.

Edited by PCCstudent - 8/15/12 at 5:18pm
Edited by PCCstudent - 8/15/12 at 5:18pm







