Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Drivers and Overclocking Software › **FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED**
New Posts  All Forums:Forum Nav:

**FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED** - Page 14

post #131 of 428
Thread Starter 
Thx defcoms.

I came back home and the prime95 Blend was still running without errors on all threads. I noticed a couple of desktop windows manager.exe errors(5 throughout of the day), you can check the Event Viewer Below.

So I started to place my windows on the desktop to make a print screen of the error msg and the proof of my 19 hours stable. (Note that I did the same test as blend but instead, I used the whole 16GB of memory) and then I saw that the rig was starting to not respond and bang, the mouse froze, and it happenned without any BSOD, nothing in event viewer was shown about this Freeze(hard lock) but on the desktop. The freeze/crashing was similar to a game freeze that I experience while gaming: beggining of instability and then the freeze in a 15-20 seconds lap.

As shown below in the event viewer you can see the critical error detailing a dirty reboot, but no BSODs.

The other DWM.exe errors are also shown. If someone has a clue. It happen between 5 am and 7am.





This is the error screen after the freeze. (Again: No BSODs)



Edited by KaRLiToS - 8/22/12 at 7:53pm
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #132 of 428
DWM is the desktop windows manager. It's a memory issue iirc. I have to joggle my memory a bit here lol no pun intended.
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #133 of 428
Are you using XMP profile for your ram? What I did was take a picture on my iPhone of my XMP profile under the tools section of bios. I entered all settings using Manual mode instead of XMP. I used the uefi overlockiig guiide in rog forums sticky to translate the xmp settinngs name to the bios names. Some of the settingsagave different names then what XMP profile describes. I know noob! I noticed some of the XMP profiles where not being set correctly. Also somehow pll was set to 1.35v. Should be around 1.8v.

I also use offset mode for vcore on my 3960x @ .030 this gives me 1.40 desktop underload is my voltages I posted a few post back. I will post my bios settings or send you a bios file when my son gets off the computer. He is all excited it hasn't crashed smile.gif

I also set the VTTDDR AB/CD at half of my dram voltage.

I tell you what I feel I am getting close this is the longest we have used the pc since going crossfire eyefinty. I am thinking now that crissfire eyefinty may be putting a hurting on the RIVE PCIE running default voltage. I am really confused!!!

Thanks guys I will keep you updated. But son is still playing COD BO without a single crash!! 2.5 hrs now.

Well blackops was fine Ioaded up sniper elite v2 and with in 10 min the game crashed so I am back to square one. Also what games do you guys play that are running quad crossfire on the rive?
Edited by defcoms - 8/22/12 at 4:39pm
post #134 of 428
Thread Starter 
No I am not using XMP, I am using Manual for the PRIMARY timing only and the command rate, which is 9-11-10-27- 2T (1.5v) Its Corsair Dominator GT

So what should I do about setting ALL timings, is that really necessary?

This is the issue I encounter again, even stable gives me the same results in game, this is after 9 minutes, I decided to make a video just after a failed 3 minutes of heaven.

Watch till the end
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #135 of 428
I don't see a video linked. For the ram it is the 2nd timings I entered manually. Anyways it didn't seem to make a differnce. Only thing I noticed is my cards are running cooler for some reason. Anyways I think I have done about all I can do. I have run prime blend for + 24 hrs, aida64 + heaven for over 8 hrs, intel burn test passes for hrs at extreme....I am out of ideas and going bald!
post #136 of 428
Thread Starter 
I'm getting the freeze after a couple of minutes of Heaven, you don't freeze during Heaven?
Edited by KaRLiToS - 8/22/12 at 7:53pm
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #137 of 428
it has been my experience that some ram kits dont like you only setting the first four timings and leaving everything else on auto. what i would do is set your XMP in, then go back into the bios after the reboot and reset your four primary timings, but manually input all the rest of the timings to match what their current values displayed are.
post #138 of 428
When I stress test the rig I normally use windowed mode 1920x1080 and run Aida64 at the same time. I get no lock ups.

Running heaven full screen I get locks now and then but heaven I have left running for hours in full screen @ 5960x1200 trifire eyefinity. It is hit or miss. When I do have locks ups I disable crossfire and rebuild my eyefinty group then enable crossfire and freezing stops. One thing I also noticed is that if you do a clean driver install crossfire in enabled by default. In the crossfire tab each gpu has a number. If you disable crossfire and enable it the numbers change. After the original driver install they never change again.
post #139 of 428
Pcie running starved power wise not speed wise?
post #140 of 428
Thread Starter 
Just reformatted AGAIN today with only intel drivers and Windows updates then ATI CCC 12.8

25 minutes of BF3 and again a nice lockup in my face. (With load optomized default)

gkhfsaiofsdaoifsagf fdagfdiohfsdop ufgh podafh daopfh fdapohi adopfh eaiohj gda mad.gif
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Drivers and Overclocking Software › **FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED**