Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Drivers and Overclocking Software › **FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED**
New Posts  All Forums:Forum Nav:

**FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED** - Page 18

post #171 of 428
I have default CPU configuration with all power states enabled. My CPU 3960x C0 does not support vt -d. I think the c2 version does. I have not disabled it unless it is by default.

Underload vcore is 1.368v Freq is 4.8ghz.I have not checked vcssa underload. When chip is down clocked at desktop or surfing web with windows power saving set to balanced Freq is 1.2ghz vcore is 0.86v.
post #172 of 428
Quote:
Originally Posted by tsm106 View Post

[/SPOILER]
You need to read and follow the ROG RIVE guide. There's a lot of settings you should be using to increase stability that you are not using.


I have read it maybe I am missing something what settings are you referring to ?

I am still learning my last board was a blackops board with a q9550 and 4870x2 + 4870. I am a little rusty lol.
Edited by defcoms - 8/25/12 at 9:51am
post #173 of 428
Thread Starter 
Hey defcoms: you have any update if your settings work.



@tsm106, I did the test



First test: 1st Card + 2nd Card (Crossfire Mode and Eyefinity Mode)
PASS




Second test 3rd Card + 4th Card (Crossfire Mode and eyefinity Mode)
PASS



I don't get it.

I am actually still running the second test, Heaven have been running for around 1.5 hours but before I played a lot of MW3 and no freeze.
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #174 of 428
Try running cards 2+3, and then 2+3+4.
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #175 of 428
Thread Starter 
Right away boxing3.gif
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #176 of 428
Yeah I have been playing sniper elite v2 all day:)

I had one crash @ about 4 hrs of sniper and it was actually different! My screen froze like It normally does but the sound kept playing. The screen then went black and I actually got a blue screen and it was 0101 which normally has to do with not enough vcore from what I gathered. I did OC the CPU from 4.5 to 4.8 and never increase my + offset. I am now running same setting minus VCSSA up one increment. And .055 for offset. So far no more blue screens.

How is stuff going for you? It sounds like you are making some progress!
Edited by defcoms - 8/25/12 at 3:37pm
post #177 of 428
Quote:
Originally Posted by defcoms View Post

I have read it maybe I am missing something what settings are you referring to ?
I am still learning my last board was a blackops board with a q9550 and 4870x2 + 4870. I am a little rusty lol.

clock gen filter should be set to at least 10uf.

check you memory voltages, some boards have a hard time matching voltages between the two groups, AB CD.

disabled enhanced training in memory

*forgot, set receive/trasmit slew to normal

since you raised memory current to 140%, change power phase control to extreme

vcore MOS volt should be set to 7v

From what I could see of your screens.
Edited by tsm106 - 8/25/12 at 4:04pm
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #178 of 428
Quote:
Originally Posted by tsm106 View Post

clock gen filter should be set to at least 10uf.
check you memory voltages, some boards have a hard time matching voltages between the two groups, AB CD.
disabled enhanced training in memory
*forgot, set receive/trasmit slew to normal
since you raised memory current to 140%, change power phase control to extreme
vcore MOS volt should be set to 7v
From what I could see of your screens.


Thanks
post #179 of 428
Thread Starter 
I have made no real progress, I have just been testing my hardware.

I just did two others test

--- 2nd and 3rd Card + Eyefinity = Pass

---2nd,3rd and 4th card + eyefinity = Pass/Still running.

So it seems that its my setup that is unstable.
I was prime95 stable but under 3d load, I don't pass with more than 2-3 ish cards. Need more voltages somewhere. I am afraid ro raise my VCCSA over 1.26v, with LLC, I get up to 1.32v.

Anyway, I learned to troubleshoot. Thanks to you guys, especially tsm106. He knows where he's going. bike.gif (teamviewer)
Edited by KaRLiToS - 8/25/12 at 4:34pm
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #180 of 428
What are you using to measure VCCSA? I wonder what mine is at.
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Drivers and Overclocking Software › **FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED**