Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Drivers and Overclocking Software › **FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED**
New Posts  All Forums:Forum Nav:

**FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED** - Page 24

post #231 of 428
So far so good on the asus bios. Played Sniper Elite v2 last night for about 3 hrs. BF3 for for a hr or so. I left Heaven running over night at max settings at my native eyefinity resolution and it was still going this morning along with my air conditioner lol.


One thing I noticed on this bios is you can't over clock your cards in crossfire only the card with the monitors attached will take the OC from CCC. I set the clocks to 1000 and tested looking at the sensors in gpu-z on the primary card took the OC. The other 2 cards where still at 925. Powercore is still powering off the other 2 cards while on the desktop so that is good. Oh well at least I am making some kind of progress.

I found a updated asus bios that is supposed to have functioning 2d clocks. I am going to stick with this bios for a few days and see if I have any more crashes if not I will test the other bios. I am wondering if the cards being stuck at 3d clocks have anything to do wih not crashing.
Edited by defcoms - 8/30/12 at 5:18am
post #232 of 428
Quote:
Originally Posted by defcoms View Post

So far so good on the asus bios. Played Sniper Elite v2 last night for about 3 hrs. BF3 for for a hr or so. I left Heaven running over night at max settings at my native eyefinity resolution and it was still going this morning along with my air conditioner lol.
One thing I noticed on this bios is you can't over clock your cards in crossfire only the card with the monitors attached will take the OC from CCC. I set the clocks to 1000 and tested looking at the sensors in gpu-z on the primary card took the OC. The other 2 cards where still at 925. Powercore is still powering off the other 2 cards while on the desktop so that is good. Oh well at least I am making some kind of progress.
I found a updated asus bios that is supposed to have functioning 2d clocks. I am going to stick with this bios for a few days and see if I have any more crashes if not I will test the other bios. I am wondering if the cards being stuck at 3d clocks have anything to do wih not crashing.


It shouldn't be an issue, unless your main card is unstable to begin with. Btw, your terminology is off, it's ULPS that shuts down the idle slave cards.

What driver are you using?
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #233 of 428
Thread Starter 
hey defcoms, do you have a link for that Asus Bios, I will try it.

Sorry I was not online much these days. I worked hard this week and it was my birthday today.

28 years old. Getting older.
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #234 of 428
hello,

i think cause of problem is somewhere with the cards not being all from same vendor

best
revro
post #235 of 428
Thread Starter 
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #236 of 428
Thread Starter 
http://forums.totalwar.com/showthread.php/35440-7xxx-Series-AMD-cards-freezes-and-lock-ups?s=5fc1758c1007a70285a424171d80f1e7

Another Thread about 7xxx series Freeze and lockups.

AMD needs to do something about it.
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #237 of 428
maybe you should revert to 12.6 or 12.7. i believe those drivers worked for other people. or is it just the problem of the motherboard?
callsign vega and l88bastar have both been both using quad 7970 setups

best
revro
post #238 of 428
Quote:
Originally Posted by revro View Post

maybe you should revert to 12.6 or 12.7. i believe those drivers worked for other people. or is it just the problem of the motherboard?
callsign vega and l88bastar have both been both using quad 7970 setups
best
revro


Their quads are weeks old. And one dude only runs a rig for 30 days before returning it lol.
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #239 of 428
Well add me to the list.
System:
I7 3930k C2
Sabertooth X79
Gigabyte 7970, Gigabyte 7970, Sapphire 7970.
PSU Corsair AX1200W
Ram : 2x4gb ddr3 1600 Gskill Ripjwas X ( waiting on new ram atm)
CPU and GPU are watercooled.
GPUs came from my previous STABLE build with i7 2600k, so it's NOT the GPU's, they worked on my previous rig flawlessly stock and OC 1200/1620
PSU came from my previous STABLE build as well, i7 2600k was OC to 4.8ghz so it's NOT my PSU, since current build hardlocks at stock settings, and is not drawing anywhere near 1200w
System passed OCCT and Prime and memtests
System hardlocks when I play any 3d game at random, and I have to push power button then to resest it, and then it says OC failed to me.
I've tried lots of different settings with same great results of hardlocking.
And just as the ppl on asus rog forums I run eyefinity as well. Going to try to run single monitor and see how that goes.
mad.gif I should've stayed with my P67 build mad.gif
Mark IV
(18 items)
 
  
CPUMotherboardGraphicsGraphics
R7 Ryzen 1800x @ 3.906 ghz Asus Crosshair 6 Hero AM4 EVGA GeForce GTX 1080 Ti FTW3 Zotac GeForce GTX 1080 Ti Extreme Amp 
RAMRAMHard DriveHard Drive
G.Skill F4-3200C15D-32GTZ 14-14-14-30-1T G. Skill l F4-3200C15D-32GTZ WD Caviar Black 1T Sata III Samsung F3 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 850 EVO 2.5" 500GB SATA III PNY 128gb SSD boot DVD-RW  MCP655-B + EX360 (push) + Xtreme Nova 1080 (p... 
OSMonitorKeyboardPower
Win 10 Samsung 28" U28D590D Cooler Master Storm Lepa G1600 
CaseMouse
Xigmatek Elysium CM sentiel 
  hide details  
Reply
Mark IV
(18 items)
 
  
CPUMotherboardGraphicsGraphics
R7 Ryzen 1800x @ 3.906 ghz Asus Crosshair 6 Hero AM4 EVGA GeForce GTX 1080 Ti FTW3 Zotac GeForce GTX 1080 Ti Extreme Amp 
RAMRAMHard DriveHard Drive
G.Skill F4-3200C15D-32GTZ 14-14-14-30-1T G. Skill l F4-3200C15D-32GTZ WD Caviar Black 1T Sata III Samsung F3 
Hard DriveHard DriveOptical DriveCooling
SAMSUNG 850 EVO 2.5" 500GB SATA III PNY 128gb SSD boot DVD-RW  MCP655-B + EX360 (push) + Xtreme Nova 1080 (p... 
OSMonitorKeyboardPower
Win 10 Samsung 28" U28D590D Cooler Master Storm Lepa G1600 
CaseMouse
Xigmatek Elysium CM sentiel 
  hide details  
Reply
post #240 of 428
I'm currently testing out this 3930, and decided what the hell, I'll go back to RC11 and flashed all cards to xfx be bios aka 1000/1425. 3930 at 5ghz, 1.480v etc etc, gpu's maxed out at 1300/1750, 222fps in heaven 3 bench thread settings. I'm stuck with a slightly bum card atm, which will be remedied later this week. Interestingly, resume from sleep works again where it stopped working with 12.8 and GE bios lol. doh.gifdrunken.gif

BF3 works, though I stopped playing after 30 minutes, kinda bored of that game now. I dunno why you guys are having issues but if yer in Socal, pm me and we can get medieval on your rig.
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Drivers and Overclocking Software › **FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED**