Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Drivers and Overclocking Software › **FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED**
New Posts  All Forums:Forum Nav:

**FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED** - Page 4

post #31 of 428
Thread Starter 
2.5 Hours of Prime95 than BSOD 0x9c again

I enetered Auto for VTT and VCCSA on reboot and auto vtt is 1.25v and auto VCCSA is 1.275v and also auto PLL is set at 1.9v so I thought it was too high so decided to modify it in EVO and pow, freeze, hard reboot.


tsm106: my VCCSA is set to high LLC / 130%

CPU Voltage Frequency is 700khz
VCCSA Voltage Frequency is at 400 Khz

DRAM Current capability AB and CD is set at 120%, my memory is stock at 2133Mhz
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #32 of 428
DRAM current should be 140% and power phase set extreme.


Also, I wouldn't use auto settings for VTT VCCSA.
Edited by tsm106 - 8/19/12 at 9:59am
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #33 of 428
I also had an artifacting card on my 4X 7970 that was artifacting. The only way to find the bad one was to use the DIP-switch on the RIVE and try each card alone by itself. Had to RMA that one 6 months ago.

Don't try 2 cards at a time. Use only one at a time with the 3 other dip-switch closed/OFF.

And are you sure your PSU is working fine? 4X 7970 + a 3930k OCed is eating alot of juice. Did you try a different PSU just to be sure?
    
CPUCPUMotherboardGraphics
i7-5930k @ 4.9  i7-3930k @ 5.1 (2nd rig) Asus Rampage V (X99) + Asus Rampage IV (2nd rig) 2X Nvidia 1080 Ti SLI watercooled 
GraphicsRAMRAMHard Drive
2X Nvidia 980 Ti SLI watercooled (2nd rig)  4X8GB=32GB G.Skill DDR4-2700 4X4GB=16GB Ripjaws DDR3 2400 CL9 (2nd rig) 3X Samsung 840 Evo 1TB SSD 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Pro 250GB 3XSeagate 3TB LG Blu-ray writer 2X Quad-120 MCR420 
CoolingCoolingCoolingCooling
2X Triple-120 MCR320 + 1X Triple-120 Feser 2X Dual-120 XSPC RX240 32 Gentle Typhoon fans (mix of 3000 and 1850rpm) Reservoir 2X Koolance RP-452x2 with 4X MCP655 p... 
CoolingOSMonitorKeyboard
2X EK Supreme HF CPU waterblock Windows 10 Pro x64 Acer XB270HU IPS G-Sync 2440p (main rig) 3X 30'... CoolerMaster Masterkeys Pro S MX blue switch, C... 
PowerCaseMouseAudio
Antec HCP1200 + AX850 dual PSU main rig, AX120... Mountain Mods Extended Ascension + Pedestal 24 ... Logitech G502 x 2 PSB speakers 5.1 
  hide details  
Reply
    
CPUCPUMotherboardGraphics
i7-5930k @ 4.9  i7-3930k @ 5.1 (2nd rig) Asus Rampage V (X99) + Asus Rampage IV (2nd rig) 2X Nvidia 1080 Ti SLI watercooled 
GraphicsRAMRAMHard Drive
2X Nvidia 980 Ti SLI watercooled (2nd rig)  4X8GB=32GB G.Skill DDR4-2700 4X4GB=16GB Ripjaws DDR3 2400 CL9 (2nd rig) 3X Samsung 840 Evo 1TB SSD 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Pro 250GB 3XSeagate 3TB LG Blu-ray writer 2X Quad-120 MCR420 
CoolingCoolingCoolingCooling
2X Triple-120 MCR320 + 1X Triple-120 Feser 2X Dual-120 XSPC RX240 32 Gentle Typhoon fans (mix of 3000 and 1850rpm) Reservoir 2X Koolance RP-452x2 with 4X MCP655 p... 
CoolingOSMonitorKeyboard
2X EK Supreme HF CPU waterblock Windows 10 Pro x64 Acer XB270HU IPS G-Sync 2440p (main rig) 3X 30'... CoolerMaster Masterkeys Pro S MX blue switch, C... 
PowerCaseMouseAudio
Antec HCP1200 + AX850 dual PSU main rig, AX120... Mountain Mods Extended Ascension + Pedestal 24 ... Logitech G502 x 2 PSB speakers 5.1 
  hide details  
Reply
post #34 of 428
Quote:
Originally Posted by tsm106 View Post

Yea, just flip all switches off and turn one on at a time. Test each card on single and three screens. Doing this you test, 1 each card and 2, each slot. You won't have to reinstall the drivers either. If all cards check out then we will look at other possible problems. Cpu is good, 12 hrs prime avx.

This, is what I'd do.

However, regarding the CPU...Prime doesn't test the system agent/PCI-E controller at all and stable cores, cache, and IMC do not guarantee the rest.

Edit: I see you beat me to it with the comment on VCCSA.
Quote:
Originally Posted by tsm106 View Post

Try upping VCCSA to 1.25v

1.25v VCCSA sounds excessive.
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.3/3.6GHz core/uncore, 1.225/1.2v Gigabyte X99 SOC Champion (F22n) 2x Sapphire R9 290X Tri-X OC New Edition (10036... 4x4GiB Crucial @ 2667, 12-11-12-27-T1, 1.37v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.05) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Cooler Master Nepton 280L 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Reference R9 290X w/Stilt's MLU 1000e / 1375m E... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.3/3.6GHz core/uncore, 1.225/1.2v Gigabyte X99 SOC Champion (F22n) 2x Sapphire R9 290X Tri-X OC New Edition (10036... 4x4GiB Crucial @ 2667, 12-11-12-27-T1, 1.37v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.05) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Cooler Master Nepton 280L 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Reference R9 290X w/Stilt's MLU 1000e / 1375m E... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
post #35 of 428
Quote:
Originally Posted by Blameless View Post


1.25v VCCSA sounds excessive.

According to ROG, it's good to a variable less than cpu vcore, so it is not excessive.

I don't run that high of a VCCSA but you can run it higher and keep it in ratio by raising PCH as well to iron stability issues. Running quads does put a lot of stress on the pcie bus.
Edited by tsm106 - 8/19/12 at 10:08am
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #36 of 428
Thread Starter 
Quote:
Originally Posted by tsm106 View Post

DRAM current should be 140% and power phase set extreme.
Also, I wouldn't use auto settings for VTT VCCSA.

I never used AUTO on any voltage not even VTTDDR AB/CD I always set everything manually.

PowerPhase is automatically set at extreme over 130% CPU Current capability anyway. But just read about DRAM Current and it says 130% Minimum for 8Gb over 2133Mhz so with 16 Gb i'll put it at 140%

Quote:
Originally Posted by Levesque View Post

I also had an artifacting card on my 4X 7970 that was artifacting. The only way to find the bad one was to use the DIP-switch on the RIVE and try each card alone by itself. Had to RMA that one 6 months ago.
Don't try 2 cards at a time. Use only one at a time with the 3 other dip-switch closed/OFF.
And are you sure your PSU is working fine? 4X 7970 + a 3930k OCed is eating alot of juice. Did you try a different PSU just to be sure?

I didn't try 2 cards at a time, I tried all cards individually like I said few posts ago on eyefinity and everything worked great. I also tried all four cards (Quadfired) on one screen and everything was perfect, all cards are at stock. And I just wanted to test with 2 cards, I want to isolate the issue by trying every possible combinations.

and my PSU comes from a Reviewer at Guru3d, hes from canada he says the unit is in perfect condition since he tested it.

Quote:
Originally Posted by Blameless View Post

This, is what I'd do.
However, regarding the CPU...Prime doesn't test the system agent/PCI-E controller at all and stable cores, cache, and IMC do not guarantee the rest.
Edit: I see you beat me to it with the comment on VCCSA.
1.25v VCCSA sounds excessive.

I only need 1.17v VCCSA when I was running 2242 Mhz 10-11-10-28 and with my triple 6970 in eyefinity ( it was working great back then) and the VTT was set at 1.25v
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #37 of 428
Quote:
Originally Posted by tsm106 View Post

According to ROG, it's good to 1.4v, so it is not excessive.

I've always been wary of running most voltages at the short term absolute max ratings (1.4v in the case of VCCSA). The VID range ends at 1.2v, according to Intel.

i don't imagine 1.25-1.3v would be a problem short term, but the lowest stable voltage should be used once things are sorted, and the chip shouldn't need so much voltage to utilize I/O that is perfectly within spec.
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.3/3.6GHz core/uncore, 1.225/1.2v Gigabyte X99 SOC Champion (F22n) 2x Sapphire R9 290X Tri-X OC New Edition (10036... 4x4GiB Crucial @ 2667, 12-11-12-27-T1, 1.37v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.05) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Cooler Master Nepton 280L 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Reference R9 290X w/Stilt's MLU 1000e / 1375m E... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.3/3.6GHz core/uncore, 1.225/1.2v Gigabyte X99 SOC Champion (F22n) 2x Sapphire R9 290X Tri-X OC New Edition (10036... 4x4GiB Crucial @ 2667, 12-11-12-27-T1, 1.37v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.05) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Cooler Master Nepton 280L 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Reference R9 290X w/Stilt's MLU 1000e / 1375m E... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
post #38 of 428
Another thing you haven't tried yet Karlitos, is running 2 cards, then 3 cards, then finally 4 cards. This will narrow down when the crashing happens or how many cards it takes. Can you run trifire + eyefinity w/o issues?

I know for a fact I can ignoring my current setup because I went from two to three cards and finally to four cards. You guys that jump right into the deep end, it's easy for you to skip the other steps.
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #39 of 428
Could you try running one screen quad fire with the adapter? Should clear all doubts that the adaptors are the problem
post #40 of 428
I know im probably not the most experienced here but i encountered a similar issue with Crossfire (2cards) And eyefinity when my overclock and/or RAm was unstable, Basicly it'd instantly crash to a black screen (Which i later found out was an unstable overclock) Because Eyefinity requires increased PCIE Bus communication, So if you've not already tried with your 3930k @ stock and everything else at stock i'd highly reccemend doing so.


Later i'd just get random app crashes wich were the result of my second stick being faulty, Where the app would just crash refering to a driver error when infact it was a ram problem
MEGATRON
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 4710MQ P170-SM-A Nvidia GTX 980M @ 1470mhz 32GB DDR3L 1600mhz 
Hard DriveHard DriveHard DriveOptical Drive
Samsung SSD 840 EVO Msata 250GB SanDisk SDSSDX120GG25 HGST 1TB Blu-Ray 
CoolingOSMonitorKeyboard
OverCharged Cage fans Windows 8.1 + Virtual Machines Modified 1080P glossy IPS 60hz Stock 
Power
240 Watt Brick 
  hide details  
Reply
MEGATRON
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 4710MQ P170-SM-A Nvidia GTX 980M @ 1470mhz 32GB DDR3L 1600mhz 
Hard DriveHard DriveHard DriveOptical Drive
Samsung SSD 840 EVO Msata 250GB SanDisk SDSSDX120GG25 HGST 1TB Blu-Ray 
CoolingOSMonitorKeyboard
OverCharged Cage fans Windows 8.1 + Virtual Machines Modified 1080P glossy IPS 60hz Stock 
Power
240 Watt Brick 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Graphics Cards › AMD/ATI › ATI Drivers and Overclocking Software › **FIXED** Eyefinity, Quad fire 7970, CCC 12.8 (12.x) Crash (hang/freeze) Galore, What to do? **FIXED**