Overclock.net › Forums › Cooling › Water Cooling › [Build Log] CaseLabs STH10 - Aquacomputer EVGA - "Seanimus448"
New Posts  All Forums:Forum Nav:

[Build Log] CaseLabs STH10 - Aquacomputer EVGA - "Seanimus448" - Page 18

post #171 of 1388
Thread Starter 
Quote:
Originally Posted by cpachris View Post

1) you'll need two separate cables from the PSU. you can't split one eight pin into two.
2) different drives have different power requirements...but you should be fine. I have 8 SSD's on one cable. use 18 awg...and there shouldn't be a problem.
Thanks, on that note...can i get a 16 AWG into one of the SATA pass through connectors. Thought it was tough with 16 AWG...but had same problem with 18 AWG, so i must be doing something wrong.

Right white cable is 16AWG, left yellow is 18AWG


Oh shoot, just realized i dont have enough sleeving for 200 feet (maybe 300feet including fan, sata), and I definitely don't have enough pre-cut shrink (maybe like 200x).

Have to set alarm for 5:30AM, to get next time slot for MDPC>
Edited by Seanimus - 12/2/12 at 6:41pm
post #172 of 1388
I used 18 awg and it was a tight fit. I don't think I could have gotten 16 awg down there. I used a space PCI blank bracket with a blunt edge to push them down....and it took some work. Needs to go all the way down to the bottom of that opening.


post #173 of 1388
Thread Starter 
Thanks...where did you get the white SATA Pass throughs and end ?
post #174 of 1388
FCPU

ele-611.jpg
post #175 of 1388
But you could get these:

ele-616.jpg
post #176 of 1388
Subbed for the hardware pron. Awesome work OP thumb.gif
Kathis
(16 items)
 
  
CPUMotherboardGraphicsRAM
2600k Maximus V Formula EVGA GTX 670 Kingston something 
Hard DriveHard DriveCoolingOS
OCZ Vertex 4 ~ 4 terabytes across 3 drives, not in RAID. 2 ... Water cooled, aquaero 5 LT controller/temp monitor Win7 x64 
MonitorMonitorKeyboardPower
Acer 23.3", 1920x1080 Acer 19", 1440x900 CM Storm Quickfire 700W Cooler Master Silent Pro 
CaseMouseMouse PadAudio
NXZT Switch 810 Logitech G9X Yup.  E-MU 1820m running into a Pyle 120wx2 amp, driv... 
  hide details  
Reply
Kathis
(16 items)
 
  
CPUMotherboardGraphicsRAM
2600k Maximus V Formula EVGA GTX 670 Kingston something 
Hard DriveHard DriveCoolingOS
OCZ Vertex 4 ~ 4 terabytes across 3 drives, not in RAID. 2 ... Water cooled, aquaero 5 LT controller/temp monitor Win7 x64 
MonitorMonitorKeyboardPower
Acer 23.3", 1920x1080 Acer 19", 1440x900 CM Storm Quickfire 700W Cooler Master Silent Pro 
CaseMouseMouse PadAudio
NXZT Switch 810 Logitech G9X Yup.  E-MU 1820m running into a Pyle 120wx2 amp, driv... 
  hide details  
Reply
post #177 of 1388
Thread Starter 
Had to post this..; nzxt sleeving ...not good

reason for bump is they put a wire tie inside



Ok enough fun
where do i get these mini "fan" like connectors:
(1) 3pin (in the background .. my son experiment with new Krylon Fusion paint for plastics)

(2) and 2pin:
From first picture at start of this post

With crimp connectors as well..
Edited by Seanimus - 12/2/12 at 6:41pm
post #178 of 1388
Wow, just wow. Can't think of anything else appropriate to describe the level of work here but wow.
biggrin.gif
post #179 of 1388
Thread Starter 
Quote:
Originally Posted by pgdeaner View Post

Wow, just wow. Can't think of anything else appropriate to describe the level of work here but wow.
biggrin.gif
Thanks
post #180 of 1388
Thread Starter 
CCFL Unit:




My son's gameboy mod came out better...I messed mine then in a hurry i scraped it out too hard...(not painting again with black label).
Many hours later and after sanding multiple times:


Got Frozen CPU parts. This PWM female fan connector


Uses these pins.

I guess normally crimping logic on this, back set of wings for insulation and front set for wire.

These are for the case fans, not a lot, I think 4 in total --2 in, 1 out., 1 blowing air onto AQ5.
Edited by Seanimus - 12/2/12 at 6:42pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Build Log] CaseLabs STH10 - Aquacomputer EVGA - "Seanimus448"