15 Unnecessarily Sexy Christmas Costumes
Business Insider misprinted...definitely necessary...
Sooo....I couldn't find my drill bits. Got new ones from home depot:
Got L instead of U channel. By the way I built those steps going from garage to house in 2007. and cut out the entire stair stringer with 2x12" compressed wood.:
Piece of crap.. didn't like the JB Weld thing. Sure its good with 4 sides.
3/8" holes in new workbench:
Shoot, I missed a lot a photos in between these shots..but aluminium sheet was all marked for new SLIghtBox:
I didn't like these F-Clamps..:
Bent outer edges:
Finished U on two sides and then moved to third. I have no idea why..
My first bending thing...never used it before.
Testing it out...can only get LEDs on long and one short side..If I need 3 sides, I have to trim the Acrylic another 1/8":
But it fits nice....
This is going to be the top...Have to cut out a shape now on top with JigSaw.
Going to return the Band Saw. Scared the hell out of me in the morning. Thought I was going to lose my neck like the Omen.
Changed to 1/8" 14TPI blade, and so the top wheel has to adjusted otherwise the blade doesn't feed in correctly. The damn thing snapped out and made a large sound. Too old to get those kind of body jumps backwards going.. Also the Blade is a70" circle. For me to use the band saw on the Slightbox or any material where the cut is on the inside, I have to get a band-saw welder. Getting too complicated for me.
I just need to make the Top cover of the SLightbox on my own, and not have someone else do it....After all this is my build.Edited by Seanimus - 12/23/12 at 8:36pm