Originally Posted by barkinos98
im def. stealing that idea
but yeah it's a very clever idea
Go for it...But can you please delete my images in the reply...its right above, and since few of us ganged up on Seros...only fair to ask you as well.
Originally Posted by marodox
You should get some Durelene tubing if you want it to be almost crystal clear.
Originally Posted by goodtobeking
I have the new Primochill Advanced LRT that is clear, and I was amazed at how clear it is. Never used Durelene though
White would be my guess on the sleeving
I am going to sleeve the tubes .. had to make me say that huh...before I did that..
White would be a good choice...But I need to layout what the rest looks like to make a good guess.
Finished 6 pairs of shade-19, with black wire...Went through almost 50 feet at 42" each.
For remaining 6 pairs..and skipping 2 pairs for "new" color...chose orange for copper brown sleeve and Red for Color-X sleeve
Someone had asked how I do the shrinkless sleeving..Its same as Lutro0 videos with a minor change which makes it easier for me..
Crimp one side, run sleeve in from uncrimped side...Hold at crimp side and stretch till wire and then cut. Once you release your hold the sleeve will be shorter.
Move the crimped side , sleeve to just above the insulation.
It shouldn't charr like this..if you use a new lighter with only the blue flame:
Crimp other side..Keep stretching the sleeving till other side is fully stretched out..
Hold with pliers:
Snip it with cutters:
And then shrink, burn, and rip it out:
Some shots of finished product, without the "new" sleeve;
New color among following 6 choices..Only 3 of which are viable..And the one I chose atleast in concept is the least likely one of the 3.
- Vanilla Sand
- Titanium Grey
- Grand Bleu