Overclock.net › Forums › Cooling › Water Cooling › [Build Log] CaseLabs STH10 - Aquacomputer EVGA - "Seanimus448"
New Posts  All Forums:Forum Nav:

[Build Log] CaseLabs STH10 - Aquacomputer EVGA - "Seanimus448" - Page 91

post #901 of 1388
cpachris found this diagram somewhere, this is how I have mine wired. I set alarm conditions for temperature and low flow in Aquasuite.
Alternately you could wire the relay between pin 16 (ps_on) somewhere between the psu and motherboard connector like the ATX break connectors Aquacomputer sells.
You would need one relay connector and one 2 pin connector for the 5v SB on the Aquaero.


If you do this you may need to provide +5v standby power to the Aquaero. I did, I think it's needed to return the relay to NO. I tapped off the 24 pin cables for pin 9 (+5VSB) & pin 7 (ground). I use a 10 second timeout in the software and the relay returns to normal condition.

To me it's just added insurance that the rig will shut down if it hits an overheat or low flow (possible leak) condition.
Your call.
post #902 of 1388
Hi Seanimus,

Been lurking around in here, and read through everything awhile back. Just have to say incredible build & patience too!

I do however have one question, Could you summarize the Crimps, Wire ( brand and awg ), and the connectors you were using for the HDD/SSD stack, as well as your 24 pin?


Also, I remember a post stating the type of wire that you were using, is it the same ones from Amazon or was it Carol?
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
post #903 of 1388
Quote:
Originally Posted by ForestGirl111 View Post

Who am I to disappoint? wink.gif

Much thanks FG. A breath of fresh air as I try and catch up on build logs. smile.gif
post #904 of 1388
Quote:
Originally Posted by cpachris View Post

Much thanks FG. A breath of fresh air as I try and catch up on build logs. smile.gif

redface.gif Thank you, cpachris.

It's a couple weeks old (before the snow). Now that it's freezing out I only have photos of me in a huge parka sledding, but you would never know its me!
post #905 of 1388
I'm sure the parka is cute....but hopefully warm weather brings swimsuits out before you know it. wink.gif
post #906 of 1388
Thread Starter 
Quote:
Originally Posted by Systemlord View Post

Got to love that Husky screwdriver, aren't they great?
Yep for price..
Quote:
Originally Posted by mandrix View Post

cpachris found this diagram somewhere, this is how I have mine wired. I set alarm conditions for temperature and low flow in Aquasuite.
Alternately you could wire the relay between pin 16 (ps_on) somewhere between the psu and motherboard connector like the ATX break connectors Aquacomputer sells.
You would need one relay connector and one 2 pin connector for the 5v SB on the Aquaero. If you do this you may need to provide +5v standby power to the Aquaero. I did, I think it's needed to return the relay to NO. I tapped off the 24 pin cables for pin 9 (+5VSB) & pin 7 (ground). I use a 10 second timeout in the software and the relay returns to normal condition.
To me it's just added insurance that the rig will shut down if it hits an overheat or low flow (possble leak) condition.
Your call.
I have to do this...just don't know when.

Quote:
Originally Posted by cookiesowns View Post

Hi Seanimus,
Been lurking around in here, and read through everything awhile back. Just have to say incredible build & patience too!
I do however have one question, Could you summarize the Crimps, Wire ( brand and awg ), and the connectors you were using for the HDD/SSD stack, as well as your 24 pin?
Also, I remember a post stating the type of wire that you were using, is it the same ones from Amazon or was it Carol?
What is Carol...
Quote:
Originally Posted by cpachris View Post

Much thanks FG. A breath of fresh air as I try and catch up on build logs. smile.gif
Quote:
Originally Posted by ForestGirl111 View Post

redface.gif Thank you, cpachris.
It's a couple weeks old (before the snow). Now that it's freezing out I only have photos of me in a huge parka sledding, but you would never know its me!
Quote:
Originally Posted by cpachris View Post

I'm sure the parka is cute....but hopefully warm weather brings swimsuits out before you know it. wink.gif
Chris is relentless. I have to be neutral [HR issues otherwise :\]
Cut in half a single NZXT USB Cable:


made 2 usb cables out of those:



Still keeping it controlled in there...huge numbers of wires...


RGB out and Aquabus left
post #907 of 1388
Quote:
Originally Posted by Seanimus View Post


What is Carol...

I looked up the wires you used on the original parts list, and Carol wires showed up as one of the results. I guess you did not use them. You think you could try and summarize my question up? It would help a ton!
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
post #908 of 1388
Thread Starter 
Here's what I have
Amazon search for NTE 18 AWG
Frozen CPU SATA Pass through Connector (no crimps required)
Frozen CPU 24 Pin Connector
post #909 of 1388
Quote:
Originally Posted by Seanimus View Post

Here's what I have
Amazon search for NTE 18 AWG
Frozen CPU SATA Pass through Connector (no crimps required)
Frozen CPU 24 Pin Connector

Good stuff man! Thanks!

You used 18AWG for the SATA pass throughs right?
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
2015 X99 Build
(20 items)
 
   
CPUMotherboardGraphicsGraphics
Intel i7 5960X Rampage V Extreme EVGA GTX980Ti KPE EVGA GTX980Ti KPE 
RAMHard DriveCoolingCooling
Corsair Dominator Platinum 64GB 2666C15 @ 2666C13 Intel SSD 750 400GB Custom water loop 2x EK PE 360mm 
CoolingCoolingCoolingCooling
EK XE 480mm EK Supremacy EVO 2x EK Supremacy VGA EK X-RES / D5 PWM 
CoolingMonitorKeyboardPower
EK Vardar F3-120/F4-120ER all around 2x Dell U2713  Custom Sprit PCB / Poker II MX Clear Corsair AX1200 Individually sleeved 
CaseMouseAudioAudio
Thermaltake X9 Snow edition Logitech G502 / Razer Mamba 2015 Schiit Bifrost Uber USB Schiit Magni 2 Uber 
CPUMotherboardGraphicsGraphics
Intel 980X Rampage III Extreme EVGA GTX580 EVGA GTX580 
RAMRAMHard DriveCooling
Corsair Dominator-GT 3x2GB DDR3-2000 C8 Corsair Vengeance 6x4GB Crucial M4 128GB Custom loop. 
MonitorKeyboardPowerCase
HP ZR2740W Razer Blackwidow Ultimate 2013 Stealth Corsair AX1200 Corsair 800D 
MouseMouse PadAudio
Razer Mamba 2012 Razer Invicta Xonar Xense 
  hide details  
Reply
post #910 of 1388
Thread Starter 
Yes the discussion is in post #171
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Build Log] CaseLabs STH10 - Aquacomputer EVGA - "Seanimus448"