Pre Caselabs TH10 Build Design

I recently finished a high end Corsair 800D build on here but after seeing what Caselabs has to offer i am ready to make the switch already!

I have some thoughts in my head about how i would like to go about planning this build out and hopefully with the help of others it will come to life.

Case - TH10

Pedestal - Still undecided

Rad Options -

(Option 1)

XSPC EX480 X2 - 1 on each side roof mounted
XSPC EX360 Crossflow X2 - If i go with a pedestal they will be mounted there

Total Cost - $213 Since i already have a EX360 Crossflow mounted in my corsair 800D

(Option 2)

Alphacool NexXxoS UT60 Full Copper 480mm X2 - 1 on each side roof mounted
Alphacool NexXxoS UT60 Full Copper 360mm - If i go with a pedestal they will be mounted there

Total Cost - $428

Fans - Corsair SP120 High Performance High Static Pressure X8 - I already have 6 mounted on my corsair 800D rads

I am cooling the following -

Intel 3770K - I can be anywhere from 4.5GHZ to 5.0GHz

Evga GTX 670 FTW X2 - Little to no overclocking in the plans for these as they already perform so well

Keep in mind i am aware this is overkill but i like overkill and although 4 rads of this size will cool anything i currently own i can think of it as being future proof.

Questions i have -

Am i really out of my mind for going with 4 rads here and should i just stick with 2 480's and save money not buying a pedestal ?

I am currently using a Swiftech MCP655 Pump With Speed Controller so if i do go with 4 rads should i run another to increase flow pressure ?

I would appreciate any advice or thoughts any 1 has on this future build!

LOL well i have a spare Bitspower tube res so if anything i can run 2 loops and mount the tube res internally that way an extra pump makes more sense.

I appreciate your input as i thought 4 rads was OD for sure but why not go extreme lol

In this case i will prob go with 2 Alphacool UT60 480's and call it a day as they should have a performance edge over the XSPC 480's.

As far as still going with the TH10 i am still undecided as i would love a vast amount of room to work with.

This is the planned hardware upgrade for this case -

Res Current - EK Spin res

New Res - Swiftech Maelstrom Dual Bay Basic Standalone Reservoir



Rads Current - XSPC 360 Crossflow/XSPC 360 Multi port

New Rads - Alphacool NexXxoS UT60 Full Copper 480mm X2



Tubing - Primochill UV Green 1/2''x3/4'' again with Blue Accent Lighting