Originally Posted by 636cc of fury
Originally Posted by coolhandluke41
XS doing a lot of copy threads
And what do you mean by this? U mad bro:D
I am pretty sure our 5Ghz thread was around for about 3 months before this thread;)
The only reason there is a 4Ghz section now is because not all cpu's can do 5ghz core and uncore, which I am sure you will figure out once you get a sample:thumb:
4Ghz core with 4Ghz uncore is doable by every chip, while not all can do 5Ghz core with 5ghz uncore, even on sub ambient temps, hence why members such as Pro and hiwa recommended this.
why should I be mad bro ? I post in them threads and have nothing against them + agree with lowering the bar for Haswell since they seams like Déjà vu SB ,but have seen more then one thread that have been wide open for a long time on another forum and see copy thread on XSAs long this threads are helpful I have no problem
P.S. have you ever see crap like this posted on OCN
Ppl at Overclock.net are talking painting the exposed metal next to the die with nail polish or mx-4 or gasket sealant prior to Liquid Metal as Liquid Metal is conductive.
response from another XS member
if you go mx4 temps will drop 9C if you go liquid ultra u get 30C !!! u can put some silicone over the parts to protect that will do the job
this one NOT the others
I think you mad bro
EDIT; crap ..they even copy threads that are already open on the same forumEdited by coolhandluke41 - 6/4/13 at 2:47pm