Overclock.net banner

MCP35X leaking a little

193 views 3 replies 3 participants last post by  ChrisTahoe 
#1 ·
Hey all,

Just got a new setup with a MCP35X as the pump and I've been running the loop for approx 24 hours outside the case to test for leaks.

It seems like the slightest amount of moisture is coming from the bottom of the pump. It doesn't drip but if you wipe your finger across it you can feel the moisture. I left a glass jug beneath the pump overnight and nothing dripped into it after a day. It seems like the heat from the pump is causing it to evaporate before a drip forms.

Basically I wanted to know if anyone else with this pump has the same experience or if this is a potential defect.

Any help would be appreciated
smile.gif
 
See less See more
1
#2 ·
nope, haven't experienced anything like that at all. Mine is as dry as can be.
 
  • Rep+
Reactions: Entropia
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top