Overclock.net › Forums › AMD › AMD CPUs › Help OC I would like to get my 1045t to 4.0GHz.
New Posts  All Forums:Forum Nav:

Help OC I would like to get my 1045t to 4.0GHz.

post #1 of 3
Thread Starter 
This is my first time OCing here is my setup. So far i'm only able to raise the bus speed up to 250 to get it to where its at now. But i would like to get it to 4.0 or the highest I can go without water cooling. Any suggestions?

AMD 1045t cpu

Asus m4a785td-v evo
ram

aftermarket cooling fan heat sink air
post #2 of 3
Your HT is too high and I don't even think you adjusted your voltages yet. I'm sure if you prime95 you'll see BSOD. What motherboard and psu are you using?
post #3 of 3

Your bus clock limit might have to do with the RAM. Bump the multiplier to x5.33 and see if you can get a 290-300Mhz bus clock while running the RAM at DDR3-1600 9-9-9-24 (given the 1333 7-7-7-20 compatibility I think 1600 9-9-9 can be assumed possible).  What else can we know about your PC? (fill out the rigbuilder and set your PC as your sig rig)

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Help OC I would like to get my 1045t to 4.0GHz.