Overclock.net › Forums › Intel › Intel Motherboards › MSI Z77 Mpower owners club / All things MPower
New Posts  All Forums:Forum Nav:

MSI Z77 Mpower owners club / All things MPower - Page 208

post #2071 of 3633


Anyone knows why im having this error with Control Center and Click Bios? My my Bios is 17.6..
post #2072 of 3633
Quote:
Originally Posted by feederman View Post



Anyone knows why im having this error with Control Center and Click Bios? My my Bios is 17.6..

I think I had that problem, I can't remember. Have you tried the standard uninstall/reinstall? Use CCleaner or RevoUninstaller. Revo will uninstall in down to the registry. Did you install the program in a different HDD other than C drive?
There is noting wrong with being over precautions..to be honest I think purging the mobo of residual power is the best thing to do before flashing and or resetting the CMOS and for good measure doing it after you've flashed.
Edited by Blatsz32 - 2/16/13 at 12:00am
Intel Sys
(17 items)
 
My Sniper
(15 items)
 
 
CPUMotherboardGraphicsRAM
I5 3570k MSI MPower EVGA 670 FTW Patriot Extreme Performance Enhanced Latency Ki... 
Hard DriveOptical DriveCoolingOS
OCZ Agility 120g LG BlueRay burner Apogee HD/DangerDen RAD res, 2x Swiftech rads, ... W7 x64 
MonitorKeyboardPowerCase
2x LG 32' SteelSeries Merc Gaming Board OCZ 850watt CM Storm Trooper 
MouseMouse PadAudioOther
Razer Naga Razer Vesputa Pioneer Amp NZXT Hue 
Other
Syth Kaze Master Pro 
CPUMotherboardGraphicsRAM
FX-8150 Gigabyte 990fxa UD-7 Asus GTX570/ sli Corsair Vengence  
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility3  WD Caviar Black x2 WD Caviar Green LG Blue-Ray 
CoolingOSMonitorKeyboard
Corsair H100 W7 64 32" LG and 32" Vizio Merc z-board 
PowerCaseMouse
Ultra 1000w CM Sniper Razor Naga 
  hide details  
Reply
Intel Sys
(17 items)
 
My Sniper
(15 items)
 
 
CPUMotherboardGraphicsRAM
I5 3570k MSI MPower EVGA 670 FTW Patriot Extreme Performance Enhanced Latency Ki... 
Hard DriveOptical DriveCoolingOS
OCZ Agility 120g LG BlueRay burner Apogee HD/DangerDen RAD res, 2x Swiftech rads, ... W7 x64 
MonitorKeyboardPowerCase
2x LG 32' SteelSeries Merc Gaming Board OCZ 850watt CM Storm Trooper 
MouseMouse PadAudioOther
Razer Naga Razer Vesputa Pioneer Amp NZXT Hue 
Other
Syth Kaze Master Pro 
CPUMotherboardGraphicsRAM
FX-8150 Gigabyte 990fxa UD-7 Asus GTX570/ sli Corsair Vengence  
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility3  WD Caviar Black x2 WD Caviar Green LG Blue-Ray 
CoolingOSMonitorKeyboard
Corsair H100 W7 64 32" LG and 32" Vizio Merc z-board 
PowerCaseMouse
Ultra 1000w CM Sniper Razor Naga 
  hide details  
Reply
post #2073 of 3633
Chann3l, I have used your oc settings to overclock the cpu but why it never down clock?
My First Build
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 3570k MSI Z77 MPower Sapphire HD 7850 OC 2GB Samsung Green DDR3 1600MHZ 2x4GB 
Hard DriveHard DriveOptical DriveCooling
Intel SSD 330 series 120GB Western Digital Blue 1TB Sony OEM DVD-RW Cooler Master Hyper 212 EVO with Push/Pull Conf... 
OSPowerCase
Windows 7 Ultimate x64 Corsair HX850 +80Silver Cooler Master CM690 II Advanced (USB 3.0) 
  hide details  
Reply
My First Build
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 3570k MSI Z77 MPower Sapphire HD 7850 OC 2GB Samsung Green DDR3 1600MHZ 2x4GB 
Hard DriveHard DriveOptical DriveCooling
Intel SSD 330 series 120GB Western Digital Blue 1TB Sony OEM DVD-RW Cooler Master Hyper 212 EVO with Push/Pull Conf... 
OSPowerCase
Windows 7 Ultimate x64 Corsair HX850 +80Silver Cooler Master CM690 II Advanced (USB 3.0) 
  hide details  
Reply
post #2074 of 3633
I just bought this MB today and have some problems....
1 While booting my monitor couldnt detect signal until the os starts botting up. How can i fix this?
2 May be stupid question because i'm new for *bridge famaly. where in bios i can set DDR voltage? i need to set 1.65 V to get real clocks....
3 I have to coursors on my screeen.... One is fixed in left top corner and one is working as must....
OS Windows 8
Monitor Asus ML239
GPU AMD HD6950
Sory for may bad english
post #2075 of 3633
The problem is in my HD6950 Moded bios with ulocked shaders. I flashed Video card with bios of 6970. To keep shaders unlocked modify vga bios using RBE and set 6950 instad of 6970.
post #2076 of 3633
Quote:
Originally Posted by alextheguy View Post

Chann3l, I have used your oc settings to overclock the cpu but why it never down clock?

It doesn't down lock if you oc my way. There is a way to have it down lock someone else posted a guide in this thread when I have time I'll dig through and find it.thumb.gif
R@WR
(16 items)
 
Rawr V2
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Z77 MPower (MS-7751) Asus Radeon R9 290 Corsair Dominator DHX Pro 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 3 SSD Seagate Barracuda LG Super Multi XSPC Raystorm laing ddc 3.25, ex 240 Swiftech X... 
OSMonitorKeyboardPower
Windows 8.1 Pro LG 24inch led Backlit Corsair K60 XFX 850WPro Fully Modular 
CaseMouseMouse PadAudio
Bitfenix Ronin Steel Series Sensei Razer Goliathus Steel Series Siberius V2 
CPUMotherboardGraphicsRAM
3770k Msi z77 mpower EVGA GTX 980 Corsair Dominator 
Hard DriveHard DriveCoolingOS
WD Blue OCZ Vertex 3 SSD Custom Water Cooling, Darkside 6 port reservoir... Windows 8.1 
MonitorKeyboardPowerCase
LG 24 inch 1080P CM Quickfire Rapid, custom keys from WASD XFX Pro Fully modular 850W Gold Corsair Air 540 
MouseMouse PadAudioAudio
Corsair M65 Razer Goliathus Roccat Kave True 5.1 Headset Asus Xonar DX 7.1 Sound card 
  hide details  
Reply
R@WR
(16 items)
 
Rawr V2
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Z77 MPower (MS-7751) Asus Radeon R9 290 Corsair Dominator DHX Pro 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 3 SSD Seagate Barracuda LG Super Multi XSPC Raystorm laing ddc 3.25, ex 240 Swiftech X... 
OSMonitorKeyboardPower
Windows 8.1 Pro LG 24inch led Backlit Corsair K60 XFX 850WPro Fully Modular 
CaseMouseMouse PadAudio
Bitfenix Ronin Steel Series Sensei Razer Goliathus Steel Series Siberius V2 
CPUMotherboardGraphicsRAM
3770k Msi z77 mpower EVGA GTX 980 Corsair Dominator 
Hard DriveHard DriveCoolingOS
WD Blue OCZ Vertex 3 SSD Custom Water Cooling, Darkside 6 port reservoir... Windows 8.1 
MonitorKeyboardPowerCase
LG 24 inch 1080P CM Quickfire Rapid, custom keys from WASD XFX Pro Fully modular 850W Gold Corsair Air 540 
MouseMouse PadAudioAudio
Corsair M65 Razer Goliathus Roccat Kave True 5.1 Headset Asus Xonar DX 7.1 Sound card 
  hide details  
Reply
post #2077 of 3633
Quote:
Originally Posted by nagle3092 View Post

How to OC your Mpower for everyday use

Due to the amount of people having issues with setting up a 24/7 OC Im writing this mini-guide to setting up your Mpower so you can have a moderate overclock while still maintaining speedstep and idle voltages instead of it running at a set voltage 24/7. I'll be showing you pictures of my settings via Click Bios 2, I am only showing you them this way because its easier than taking screenshots in the bios while I write this, I do not advocate using clickbios to enter these settings. I think all adjustments should be made in the bios directly.

Oc Tab


Leave CPU ratio on Auto, dont worry we will get to that in a minute.



Leave CPU Core Voltage on Auto you can set DRAM, PLL and whatever else you want but I just adjust those mainly because I noticed the board will use a little more dram voltage than what x.m.p. specifies and my cpu doest require that much PLL, as always YMMV.

CPU Features Sub Menu


Make sure you leave C1E Support, Intel C-State Enabled and set the Package C State limit to Auto



Now here is where you will input your desired OC, I use 45 your chip might not be able to do it but it could be a good starting point. Input the value in each slot.

Now here is where everyone was having issues, remember when I told you to leave your CPU Core voltage on AUTO? Here is how you make your voltage adjustments.

Hybrid Digital Power Sub Menu


Make your adjustment with just CPU Core Vdroop Offset Control. My chip needs a setting of +62.5% to be stable at 4.5ghz, YMMV. This equates to a realworld load voltage of 1.240v tested through a multimeter (seen here) with no huge spikes or anything like that. I dont know if thats the exact value all boards will give at 62.5% offset but I dont think it would vary by much. To start though if your going for 4.5ghz I would set it at 50%, boot into windows and run cpu-z and load up prime95 and do small FFT's for awhile. The 50% value for me would have 2 cores fail after a couple hours but it would start throwing WHEA errors in minutes. 62.5% is the sweet spot for 4.5 for me, 4.6ghz is stable with 80% offset but I'm happier with the temps on 62.5%(under 70c during stress on prime95). I do recommend turning the digital compensation level to High and the CPU Core OCP Expander to Enhanced to help with overclocking. All the other settings can be left on Auto, also I recommend leaving the CPU Phase control on Auto as well, why make them work when they dont need to? It hasnt affected my stability at all during the time I've been running it like this(since the board released pretty much).

Ok so that wraps it up, go ahead and give it a try and see what you get. As always YMMV, every chip is different and could require more or less voltage to get to a desired OC. In the absence of not having an Offset this is the next best thing. Hope this helps.
Bios used during the writeup was 17.6 Beta 2 found at the link in my Sig.

Here this is the method I was looking for for you.
R@WR
(16 items)
 
Rawr V2
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Z77 MPower (MS-7751) Asus Radeon R9 290 Corsair Dominator DHX Pro 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 3 SSD Seagate Barracuda LG Super Multi XSPC Raystorm laing ddc 3.25, ex 240 Swiftech X... 
OSMonitorKeyboardPower
Windows 8.1 Pro LG 24inch led Backlit Corsair K60 XFX 850WPro Fully Modular 
CaseMouseMouse PadAudio
Bitfenix Ronin Steel Series Sensei Razer Goliathus Steel Series Siberius V2 
CPUMotherboardGraphicsRAM
3770k Msi z77 mpower EVGA GTX 980 Corsair Dominator 
Hard DriveHard DriveCoolingOS
WD Blue OCZ Vertex 3 SSD Custom Water Cooling, Darkside 6 port reservoir... Windows 8.1 
MonitorKeyboardPowerCase
LG 24 inch 1080P CM Quickfire Rapid, custom keys from WASD XFX Pro Fully modular 850W Gold Corsair Air 540 
MouseMouse PadAudioAudio
Corsair M65 Razer Goliathus Roccat Kave True 5.1 Headset Asus Xonar DX 7.1 Sound card 
  hide details  
Reply
R@WR
(16 items)
 
Rawr V2
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770k Z77 MPower (MS-7751) Asus Radeon R9 290 Corsair Dominator DHX Pro 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 3 SSD Seagate Barracuda LG Super Multi XSPC Raystorm laing ddc 3.25, ex 240 Swiftech X... 
OSMonitorKeyboardPower
Windows 8.1 Pro LG 24inch led Backlit Corsair K60 XFX 850WPro Fully Modular 
CaseMouseMouse PadAudio
Bitfenix Ronin Steel Series Sensei Razer Goliathus Steel Series Siberius V2 
CPUMotherboardGraphicsRAM
3770k Msi z77 mpower EVGA GTX 980 Corsair Dominator 
Hard DriveHard DriveCoolingOS
WD Blue OCZ Vertex 3 SSD Custom Water Cooling, Darkside 6 port reservoir... Windows 8.1 
MonitorKeyboardPowerCase
LG 24 inch 1080P CM Quickfire Rapid, custom keys from WASD XFX Pro Fully modular 850W Gold Corsair Air 540 
MouseMouse PadAudioAudio
Corsair M65 Razer Goliathus Roccat Kave True 5.1 Headset Asus Xonar DX 7.1 Sound card 
  hide details  
Reply
post #2078 of 3633
Quote:
Originally Posted by big_buka View Post

The problem is in my HD6950 Moded bios with ulocked shaders. I flashed Video card with bios of 6970. To keep shaders unlocked modify vga bios using RBE and set 6950 instad of 6970.

You got the shader unlock to work? If so, you'd be the first to my knowledge.
Inferior FTW!
(23 items)
 
  
CPUMotherboardGraphicsRAM
R7 1700@3.9ghz Asus Crosshair VI Hero Founder's GTX 1070 200/800 G.skill TridentZ RGB 3200 C14 
Hard DriveHard DriveCoolingCooling
Samsung 960 Evo Centon 120gb EK-FB Monoblock XSPC RX360 (White) 
CoolingCoolingCoolingCooling
XSPC RX240 (White) EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate 
CoolingCoolingCoolingOS
EK Double Bay PWM D5 MX Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 
MonitorKeyboardPowerCase
Samsung C32F391 Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo 
MouseMouse PadAudio
Razer Naga Epic Razer Vespula Sennheiser HD598 
  hide details  
Reply
Inferior FTW!
(23 items)
 
  
CPUMotherboardGraphicsRAM
R7 1700@3.9ghz Asus Crosshair VI Hero Founder's GTX 1070 200/800 G.skill TridentZ RGB 3200 C14 
Hard DriveHard DriveCoolingCooling
Samsung 960 Evo Centon 120gb EK-FB Monoblock XSPC RX360 (White) 
CoolingCoolingCoolingCooling
XSPC RX240 (White) EK Vardar F2s (x5) EK-FC1070 GTX1070 (nickel/plexi)  EK GTX1070 FE backplate 
CoolingCoolingCoolingOS
EK Double Bay PWM D5 MX Bitspower 250 Z-Multi Res EK HDC fittings (12mm) Windows 10 
MonitorKeyboardPowerCase
Samsung C32F391 Razer Blackwidow Chroma EVGA Supernova G1 1000w Phanteks Enthoo Primo 
MouseMouse PadAudio
Razer Naga Epic Razer Vespula Sennheiser HD598 
  hide details  
Reply
post #2079 of 3633
I have had this board for a while now. But I was wondering if there was a way to shut off the blue LEDs on the board as I'm trying to go for a red/black look?

I will be removing the plates on the heat sinks to get rid of the red as well.

Thanks for the help!
post #2080 of 3633
Quote:
Originally Posted by CrazyCorky View Post

I have had this board for a while now. But I was wondering if there was a way to shut off the blue LEDs on the board as I'm trying to go for a red/black look?

I will be removing the plates on the heat sinks to get rid of the red as well.

Thanks for the help!

 

You can disable them in the BIOS.

 

I think this is the setting:

 

 

Edit again, Yup that is the setting, I just tried it.


Edited by anubis1127 - 2/17/13 at 7:31am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › MSI Z77 Mpower owners club / All things MPower