Overclock.net › Forums › Intel › Intel Motherboards › MSI Z77 Mpower owners club / All things MPower
New Posts  All Forums:Forum Nav:

MSI Z77 Mpower owners club / All things MPower - Page 67

post #661 of 3633
Quote:
Originally Posted by NewHighScore View Post

You've got one awesome chip there my friend! delid?



YES it is delidded!




I got this chip back in May on day 1 when 3570k first came out.




My testing back in May.
Quote:

Ambient temp 25C.

4.5GHZ 1.17V

http://valid.canardpc.com/show_oc.php?id=2355447



Cooling:

Swiftech Apogee HD, 1x120 +1x360 mm HWLabs Stealth GT radiators, Each has 1 Triebwerk 123 fan in pull, TIM is IC Diamond.

Edited by SonDa5 - 11/11/12 at 8:15am
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
B.K.T.
(24 items)
 
  
CPUMotherboardGraphicsGraphics
De-Lidded direct die mount Intel i7-4790k No IHS ASUS Z97 WS Sapphire HD7950 OC 950mhz Edition Sapphire HD7950 Vapor X 
RAMHard DriveHard DriveHard Drive
GSkill 2400mhz CL9  Samsung 840 caviar black Hitachi 
Hard DriveOptical DriveCoolingCooling
OCZ AGILITY 4 LG 16x BD burner DT Sniper CPU block Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl  
CoolingCoolingCoolingOS
Swiftech pump 655 Alphacool NexXxos UT 60 420mm 3x140mm Bgears 1800 RPM fans in pull on radiator Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
BenQ XL2410T SS 6gv2 Seasonic Platinum 860 Silverstone Raven RV02-BW 
MouseMouseMouse PadAudio
Steel Series sensei Steel Series sensei SS Experience I-2, SS 9HD Audio Technica ATH-AD900 
  hide details  
Reply
post #662 of 3633
Quote:
Originally Posted by mfranco702 View Post

Quote:
Originally Posted by Sevada88 View Post

I have the same "issue". I just can't get it to downclock while in idle state. It does downvolt, just does not downclock....
When I did a fresh install of Windows 8, I ran CPU-Z and it was working; the CPU was dropping to 1.6GHz while it was in idle, but after I restarted my PC, it was stuck in 3.8 again. Now it's overclocked to 4.2, and it stays there.
Could this cause stability issues since the CPU has to run at at 4.2 with 0.9xx volts?
EDIT: this thread might help as well, he was having the same issue: http://www.overclock.net/t/1323459/my-3570k-is-possessed/0_30

I remember after i installed a fresh copy of win 7 my processor was running at 1600 Mhz as well, but then I started to mess around with the OC settings and ever since I cant make it go down in frequency anymore.

Is this a bug, an issue how come voltage is dropping and not the frequency, Im starting to miss my old P67 ASUS board....mad.gifdevil.gifmadsmiley.png

Here Im attaching some pics of my BIOS's settings, right after reset everything to default, I just modified the sata mode to be able to boot.



 

**First pic = C1E is set to DISABLED !!  Please enable.. then CPU multi should drop in OS

 

 

Quote:
Originally Posted by Sevada88 View Post

I'll try to get some pics as well, although I think my settings are set correctly because my voltage does drop, just not the frequency.

I didn't mess with the settings, I just used OCGenie. I'll set everything to default. And see what happens.

I doubt this is an issue with the board, I think it's other manufacturers have the same issue as well.

EDIT: do we have an MSI representative in this board? Maybe we could get some help.

 

Same as above... make sure C1E is set to ENABLE

 

Quote:
Originally Posted by SonDa5 View Post

For you guys having problems with over clocking.

I am running the newest latest BIOS and have tried Samsung low profile sticks or RAM, Crucial 1.5v 1866mhz CL9 sticks and Gskill 2400mhz CL10 sticks.


Of those kits above only the Gskill is depenadable for over clocking at decent speeds.


I'm still looking for better sticks of ram to over clock but this MB and my CPU give me hard time at over clocking ram.

To me the MB seems to be very picky with RAM. So that may be a part of the problem.


 

 

 You issue is likely with the tertiary timing sets... This mobo defaults tertiary timings tight !!! Not all RAM is compatible. You may try moving ALL tertiary timings currently set to 3 or 4 - up to 5 or 6

*Gskill uses high bin PSC most cases which will run extremely tight tertiary timings... this is why your seeing OC come easier. Its not mobo... its not RAM.. its how they need to work together wink.gif

 

 

 

 

Quote:

Originally Posted by Sharchaster View Post

Quote:
Originally Posted by Sharchaster View Post

hello MPower owners
I have some questions about my MPower motherboards...
why when I set my processor into 4.5 Ghz @auto voltage @1.240 volt, and I set my RAM into 2133 Mhz @10-11-10-27, I am unable to booting to windows? so my max stable clock are 4.4 Ghz now....@ that ram mad.gif
any help would be greatly appreciated

any input for my problem above? because I think no one answered my questions.

 

 If your rig doesnt POST .. your likely pushing RAM to hard without enough volts. Leave CPU at 4.2ghz and try again.. it you encounter same issue.. then you know to focus on RAM OC and not CPU. This is basic stuff here...

 

 

Quote:

Originally Posted by ride1226 View Post

Quote:
Originally Posted by Scorpion49 View Post

XMP profiles adjust the voltage for you. If you increased the speed beyond the XMP profile you will need to manually increase the voltage.

I dont think 1866 or 2133 is beyond the XMP profiles is it? I have not had a BSOD at 1866, however thats below my rams stated speed. 2133 is only one step up and I got a BSOD 30 minutes into using the computer. Also, neither of those settings let the temp display on the LED. Both still leave it reading out A0. Very frustrating to need to buy a new set of ram, luckily this Corsair ran great in my old build that is now being set up for my parents so maybe I will just put it back in there and call it a loss and find something better for this board. I want to be able to overclock, not have to UNDERCLOCK my ram just to have a stable PC. Thats BS in my opinion.

Another weird observation, I installed CPU-z, Prime95, and RealTemp. I ran a stress test with Prime95 at stock clocks, CPU jumped into turbo at 3.8ghz, I watched my temps and in just 5-6 minutes hit 90*C. WTH? Thats at stock clock and stock voltage and stock heatsink. How am I supposed to overclock a CPU thats running that hot already? Or is it some sort of setting in those programs that I missed?

 

OC on stock cooler? Yikes.. I use stock cooler too for air cooling, but my ambient is ~40F right now... so load temps are still below 50c. I would think you may want to apply some fresh TIM and re-mount.. unless your sitting in a 78F room.. then things sound pretty normal to me.

post #663 of 3633
Quote:
Originally Posted by ride1226 View Post

All I did was turn XMP on. Thats it. Turned it on and it automatically set my ram to 2000mhz where it should be. Save and Exit BIOS, tried to boot, BSOD. I dont know how I could have messed anything up there at all. I then clicked the tab just above enable/disable XMP and turned it to 1866 and it ran fine. However, still A0 displayed on the LED.

Quote:
Originally Posted by ride1226 View Post

I dont think 1866 or 2133 is beyond the XMP profiles is it? I have not had a BSOD at 1866, however thats below my rams stated speed. 2133 is only one step up and I got a BSOD 30 minutes into using the computer.

This says you did two different things, unless you mean to say the XMP profile is for 2133 and you didn't get to run it at that speed because it BSOD at 2000mhz? I'm pretty confused at what you actually did.
post #664 of 3633
Quote:
Originally Posted by CL3P20 View Post

OC on stock cooler? Yikes.. I use stock cooler too for air cooling, but my ambient is ~40F right now... so load temps are still below 50c. I would think you may want to apply some fresh TIM and re-mount.. unless your sitting in a 78F room.. then things sound pretty normal to me.

No I am NOT overclocking on the stock cooler. I ran the stress test in completely stock trim. Had not touched anything besides setting the ram to 1866 just so this thing would run. I turned on the stress test and hit 90* in 5-6 minutes at STOCK CLOCKS with the stock cooler attached. I didnt think it should be that high thats why I asked. Once my memory/motherboard issue is sorted out and can run the Ram normally and have the A0 on the mobo display go away I will be ordering a full custom watercooling loop to start learning cpu overclocking.
Edited by ride1226 - 11/11/12 at 8:24am
post #665 of 3633
Quote:
Originally Posted by CL3P20 View Post


If your rig doesnt POST .. your likely pushing RAM to hard without enough volts. Leave CPU at 4.2ghz and try again.. it you encounter same issue.. then you know to focus on RAM OC and not CPU. This is basic stuff here...

If I set my CPU @4.2 Ghz, everything works perfect, Like I said before, my Max OC now is 4.4 Ghz, beyond that, my system is unable to booting....

my RAM is 10-11-10-27 @2133 Mhz....look at my Sig.
My BIG Spirit
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 7700K KabyLake CPU @5.0 GHz MSI Z270 Gaming M7 Motherboard MSI GTX 670 Power Edition Graphics Card Corsair Dominator Platinum 3000 MHz 16 GB DDR4 
Hard DriveHard DriveHard DriveOptical Drive
Plextor SSD 512 GB as OS Drive Samsung SSD 850 EVO 500 GB Hitachi Hardisk 1 TB HDD ASUS DVD RW 
CoolingOSMonitorKeyboard
Corsair H100i Windows 10 PRO x64 Dell 22 Inch DSR @ 2560 x 1440 (from original 1... Logitech G105 Gaming Keyboard 
PowerCaseMouse
Corsair AX760 80+ Platinum PSU Corsair Vengeance C70 Chassis Logitech 
  hide details  
Reply
My BIG Spirit
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 7700K KabyLake CPU @5.0 GHz MSI Z270 Gaming M7 Motherboard MSI GTX 670 Power Edition Graphics Card Corsair Dominator Platinum 3000 MHz 16 GB DDR4 
Hard DriveHard DriveHard DriveOptical Drive
Plextor SSD 512 GB as OS Drive Samsung SSD 850 EVO 500 GB Hitachi Hardisk 1 TB HDD ASUS DVD RW 
CoolingOSMonitorKeyboard
Corsair H100i Windows 10 PRO x64 Dell 22 Inch DSR @ 2560 x 1440 (from original 1... Logitech G105 Gaming Keyboard 
PowerCaseMouse
Corsair AX760 80+ Platinum PSU Corsair Vengeance C70 Chassis Logitech 
  hide details  
Reply
post #666 of 3633

I would remount for sure then... i can run IBT on stock cooler and not load over 70c with ambient temps sitting at 68F now.. You sir have an issue.

 

**fyi - i cant see sigs.. have them removed from my options.

post #667 of 3633
Quote:
Originally Posted by Scorpion49 View Post


This says you did two different things, unless you mean to say the XMP profile is for 2133 and you didn't get to run it at that speed because it BSOD at 2000mhz? I'm pretty confused at what you actually did.

Im sorry, that was my first attempt. I set XMP and tried to boot and got a BSOD.

Attempt 2, 1866, no BSOD. Read somewhere that this mobo did not support 2000, so stepped from 1866 to 2133 and it booted fine. 30 minutes in BSOD.

Attempt 3, where I am at now, turned it back down to 1866 because thats the only spot I had no issues, and turned here to everyone for help. Still, at this step, Mobo displays A0 on readout.

Hopefully that lays it out clearly.
post #668 of 3633
Quote:
Originally Posted by SonDa5 View Post

YES it is delidded!

I got this chip back in May on day 1 when 3570k first came out.
My testing back in May.

Mine runs crazy hot! I'm at 4.7 @ 1.325 with a pretty beefy water setup and I am getting 70-81-81-79 in p95 and just over 90 in IBT!!! I contemplated a delit with the temp difference between cores. tongue.gif TEMP ME!
Vespula vulgaris
(23 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k MSI Z77 Mpower MSI N670GTX OC Mushkin Blackline Enhanced 
Hard DriveCoolingCoolingCooling
Samsung 830 128GB Swiftech Apogee HD 4 port XSPC Dual Bay Res D5 Black Koolance screw plug G1/4" Black x 14 
CoolingCoolingCoolingCooling
Mayhem's Pastel Sunset Yellow x3 Alphacool Cape Corp Coolplex Pro 25 LT Dazmode D5 STORM Vario Monsoon 3/8" - 5/8"  
CoolingCoolingCoolingCooling
Monsoon 5/8" 90* Akasa Viper 140mm x9 Watercool HEATKILLER® GPU-X³ GTX 670 Ni-Bl Alphacool NexXxoS XT45 Full Copper 420mm 
CoolingOSMonitorPower
Alphacool NexXxoS UT60 Full Copper 140mm Windows 7 64 bit Benq GL2250 Silverstone Strider Gold Evolution 750w 
CaseMouseOther
NZXT Switch 810 SE Matte Black  Razer Deathadder MDPC  
  hide details  
Reply
Vespula vulgaris
(23 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k MSI Z77 Mpower MSI N670GTX OC Mushkin Blackline Enhanced 
Hard DriveCoolingCoolingCooling
Samsung 830 128GB Swiftech Apogee HD 4 port XSPC Dual Bay Res D5 Black Koolance screw plug G1/4" Black x 14 
CoolingCoolingCoolingCooling
Mayhem's Pastel Sunset Yellow x3 Alphacool Cape Corp Coolplex Pro 25 LT Dazmode D5 STORM Vario Monsoon 3/8" - 5/8"  
CoolingCoolingCoolingCooling
Monsoon 5/8" 90* Akasa Viper 140mm x9 Watercool HEATKILLER® GPU-X³ GTX 670 Ni-Bl Alphacool NexXxoS XT45 Full Copper 420mm 
CoolingOSMonitorPower
Alphacool NexXxoS UT60 Full Copper 140mm Windows 7 64 bit Benq GL2250 Silverstone Strider Gold Evolution 750w 
CaseMouseOther
NZXT Switch 810 SE Matte Black  Razer Deathadder MDPC  
  hide details  
Reply
post #669 of 3633
Quote:
Originally Posted by CL3P20 View Post

I would remount for sure then... i can run IBT on stock cooler and not load over 70c with ambient temps sitting at 68F now.. You sir have an issue.

**fyi - i cant see sigs.. have them removed from my options.

remount what? reset BIOS settings, or?
My BIG Spirit
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 7700K KabyLake CPU @5.0 GHz MSI Z270 Gaming M7 Motherboard MSI GTX 670 Power Edition Graphics Card Corsair Dominator Platinum 3000 MHz 16 GB DDR4 
Hard DriveHard DriveHard DriveOptical Drive
Plextor SSD 512 GB as OS Drive Samsung SSD 850 EVO 500 GB Hitachi Hardisk 1 TB HDD ASUS DVD RW 
CoolingOSMonitorKeyboard
Corsair H100i Windows 10 PRO x64 Dell 22 Inch DSR @ 2560 x 1440 (from original 1... Logitech G105 Gaming Keyboard 
PowerCaseMouse
Corsair AX760 80+ Platinum PSU Corsair Vengeance C70 Chassis Logitech 
  hide details  
Reply
My BIG Spirit
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 7700K KabyLake CPU @5.0 GHz MSI Z270 Gaming M7 Motherboard MSI GTX 670 Power Edition Graphics Card Corsair Dominator Platinum 3000 MHz 16 GB DDR4 
Hard DriveHard DriveHard DriveOptical Drive
Plextor SSD 512 GB as OS Drive Samsung SSD 850 EVO 500 GB Hitachi Hardisk 1 TB HDD ASUS DVD RW 
CoolingOSMonitorKeyboard
Corsair H100i Windows 10 PRO x64 Dell 22 Inch DSR @ 2560 x 1440 (from original 1... Logitech G105 Gaming Keyboard 
PowerCaseMouse
Corsair AX760 80+ Platinum PSU Corsair Vengeance C70 Chassis Logitech 
  hide details  
Reply
post #670 of 3633
Quote:
Originally Posted by ride1226 View Post

Im sorry, that was my first attempt. I set XMP and tried to boot and got a BSOD.
Attempt 2, 1866, no BSOD. Read somewhere that this mobo did not support 2000, so stepped from 1866 to 2133 and it booted fine. 30 minutes in BSOD.
Attempt 3, where I am at now, turned it back down to 1866 because thats the only spot I had no issues, and turned here to everyone for help. Still, at this step, Mobo displays A0 on readout.
Hopefully that lays it out clearly.


Ah yeah now I get you. What exact RAM kit are you using? It is always possible the board just doesn't like it, or that the RAM can't run at its rated maximum speeds with whatever voltage that it sets automatically. I have had XMP kits that I had to bump the voltage up on a little bit.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › MSI Z77 Mpower owners club / All things MPower