Overclock.net › Forums › Intel › Intel CPUs › GeminII S524 + i5 3570k
New Posts  All Forums:Forum Nav:

GeminII S524 + i5 3570k

post #1 of 3
Thread Starter 
I was having difficulty installing the cooler and was concerned when tightening the last screw. After a bit it simply kept turning while tightening; I didn't get the same resistance as I did from the 3 other screws. However, the cooler is making full contact and my temperatures at idle are ~28-31 and prime 95 temps are ~54 - 61. During starcraft 2 I don't go past 42 on any cores. Should I be concerned about any of this?
post #2 of 3
Yes, What if it comes off loose someday down the lane? Have you tried reseating it and checking for stripped screws?
:D
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570K [4.5ghz] Asus P8Z77 V-Pro Asus GTX 760 2X4gb Corsair XMS3 1600mhz 
Hard DriveHard DriveCoolingOS
WD Blue 1TB EZEX X 2 [RAID 0] [WD Black 640GB][2 X WD Blue 1TB EZEX] Corsair H80i Windows 7 64bit 
MonitorPowerCase
Dell Ultrasharp 23" Corsair CX430W v2 Corsair Graphite 600T 
  hide details  
Reply
:D
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570K [4.5ghz] Asus P8Z77 V-Pro Asus GTX 760 2X4gb Corsair XMS3 1600mhz 
Hard DriveHard DriveCoolingOS
WD Blue 1TB EZEX X 2 [RAID 0] [WD Black 640GB][2 X WD Blue 1TB EZEX] Corsair H80i Windows 7 64bit 
MonitorPowerCase
Dell Ultrasharp 23" Corsair CX430W v2 Corsair Graphite 600T 
  hide details  
Reply
post #3 of 3
Thread Starter 
It screwed to the same level as the rest (the amount of screw coming through the nut was the same length). I'll try resetting tonight and examine the screwes.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › GeminII S524 + i5 3570k