Overclock.net › Forums › Cooling › Water Cooling › 3930k 5Ghz 1.5v, crazy temperature......
New Posts  All Forums:Forum Nav:

3930k 5Ghz 1.5v, crazy temperature......

post #1 of 9
Thread Starter 
just finished my water cooled rig yesterday

i used NZXT switch 810 with a Feser X-changer 360 + XSPC EX240, XSPC twin DDC reservoir, twin DDC, EK-Supremacy full copper, EK-supreme HF VGA Bridge edition with parallel bridge

the 3930k is running at 5Ghz with 1.5v core voltage, 1.15 for VTT and VCCSA, CPU and VCCSA LLC both "high"

the idle CPU temp = 45-53, under Prime 95 blend test, went up to 83 degree max...(average 75 degree), small FFT.... went up to 90...and blue screen

the GPU is GTX 480 SLI, default voltage, core: 800 ram: 2000 they stayed at 40 degree idle, and 55-58 degree under furmark 1920X1080



the GPU temps are acceptable, however, the CPU is running way too hot under water...... maybe i shoud l check my CPU block?

or thee 1.5v 5Ghz 3930k is crazy hot?
post #2 of 9
Check your thermal paste and make 100% sure all the trapped air is out the rad. As since it is a day old, I'm sure all the bubbles haven't left the system. Rock the pc back and forth and side to side while tapping on the rad. This will free the trapped bubbles. You can also squeeze the lines and make is surge to help trapped bubbles more.

But a 3930k is going to get really warm at 5GHz plus those 2 480's will put out some heat also. Thanks
post #3 of 9
Well, the 480s in SLI will heat stuff up but 1.5v is a lot, like a lot of voltage. The difference between 4.8Ghz and 5Ghz is miniscule, but the voltage increase is huge. Scale it back to the highest speed you can hit without going higher than 1.4-1.425v and your chip will not be leaking voltage like a sieve. Seriously, I am trying to help, because at 1.5v you will see degradation very quickly and your chip will not last very long at all.
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #4 of 9
Thread Starter 
thanks for the reply
i checked the thermal paste and reinstalled the CPU block today, they are good...

i guess maybe it's the internal O ring for the jet plate, i changed the jet plate yesterday, maybe the O ring for the jet plate is in the incorrect position? maybe i'll have to drain the system and open the CPU block to check it........
post #5 of 9
Thread Starter 
yeah, i heard about the C2 degrade faster than the C1...

i was thinking if i can maintain a low temp for the CPU under 1.5v, maybe around 65 degree max, the cpu will be good for 24/7
post #6 of 9
I don't know if the stepping has anything to do with degradation speed, as the only difference is that C2 supports VT-d... It is the same chip, and I have yet another see anyone recommend the C1 over the C2... Also, 1.5v is just a ton for the chip, regardless. It's a matter of physics, the more power you push through, the faster it wears out. The scale is not linear, either, but closer to logarithmic (1.5v will wear 2x faster than 1.4). I am not going to push mine above 1.425v, but I will spend weeks tweaking it to get the best overclock at the lowest possible voltage, as the gains above 4.6Ghz are minimal compared to the risk. Water cooling doesn't negate the damage caused by high voltage, just by high temps.
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #7 of 9
Quote:
Originally Posted by nleksan View Post

Well, the 480s in SLI will heat stuff up but 1.5v is a lot, like a lot of voltage. The difference between 4.8Ghz and 5Ghz is miniscule, but the voltage increase is huge. Scale it back to the highest speed you can hit without going higher than 1.4-1.425v and your chip will not be leaking voltage like a sieve. Seriously, I am trying to help, because at 1.5v you will see degradation very quickly and your chip will not last very long at all.

Quote:
Originally Posted by KILLER_K View Post

Check your thermal paste and make 100% sure all the trapped air is out the rad. As since it is a day old, I'm sure all the bubbles haven't left the system. Rock the pc back and forth and side to side while tapping on the rad. This will free the trapped bubbles. You can also squeeze the lines and make is surge to help trapped bubbles more.
But a 3930k is going to get really warm at 5GHz plus those 2 480's will put out some heat also. Thanks


The 480s aren't active during typical prime runs, so unless OP ran furmark at the same time they're not part the equation.



Quote:
Originally Posted by icerain29 View Post

yeah, i heard about the C2 degrade faster than the C1...
i was thinking if i can maintain a low temp for the CPU under 1.5v, maybe around 65 degree max, the cpu will be good for 24/7



65c max.... probably around 4.6gz.
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
The 3930
(26 items)
 
Junior's 3930
(22 items)
 
DATA/HTPC
(20 items)
 
  hide details  
Reply
post #8 of 9
These are completely normal temperatures.1.5V is too much for LGA-2011 on the long run for water cooling. Stick to ~ 1.4Vcore.
Also some chips tend to have higher current leakage than others that's why comparing with other LGA-2011 users is never a good solution and can do more harm than good.

If your TIM imprint is perfect then it's OK.
    
CPUMotherboardGraphicsRAM
Ci7 5960XK @ 4.3GHz ASRock X99E-ITX NVIDIA GTX Titan X Pascal 32GB DDR4-3200 
Hard DriveHard DriveOptical DriveCooling
2x 256GB SSD RAID0 Adata SP550 960GB (storage) Samsung SE-506 EK-Supremacy MX 
OSMonitorKeyboardPower
Win10 Pro Dell P4317Q Cherry MX-Board 3.0 (MX Blue) EVGA 650W GS 
CaseMouseMouse Pad
In Win D-Frame Mini HP VoodooDNA Roccat Adrenaline 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Ci7 5960XK @ 4.3GHz ASRock X99E-ITX NVIDIA GTX Titan X Pascal 32GB DDR4-3200 
Hard DriveHard DriveOptical DriveCooling
2x 256GB SSD RAID0 Adata SP550 960GB (storage) Samsung SE-506 EK-Supremacy MX 
OSMonitorKeyboardPower
Win10 Pro Dell P4317Q Cherry MX-Board 3.0 (MX Blue) EVGA 650W GS 
CaseMouseMouse Pad
In Win D-Frame Mini HP VoodooDNA Roccat Adrenaline 
  hide details  
Reply
post #9 of 9
Thread Starter 
hi all,
i just disassemble the whole system today
i opened up the CPU block and found a little paint in the micro channel.. i removed it
i opened up the VGA blocks, they are fine

i turned off the Hardware Prefetcher and get it stabled at 1.475, now the temps are 5 degree lower..
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › 3930k 5Ghz 1.5v, crazy temperature......