Overclock.net › Forums › Cooling › Water Cooling › Need a water cooling recommendation for 3930k for 4.8ghz
New Posts  All Forums:Forum Nav:

Need a water cooling recommendation for 3930k for 4.8ghz

post #1 of 5
Thread Starter 
Hey, currently I have a 3930k cooled by corsair H80 and can get 4.2ghz at 1.3v with out any of the core temps going over 70c and I'm pretty comfortable with it, I could raise the voltage to 1.4 to get the chip to take 4.5ghz and be stable, but I could never run it full time since some of the cores go to 80c and I wouldn't want to risk damage. So my question is, if I want to achieve 4.5ghz+ up to 4.8ghz, what would be a good water cooling solution for my needs? The colder the better. There's no budget, so whatever the cost, as long as I can keep my chip as cool as possible. Thanks for your time!
post #2 of 5
You could look at something like this:

http://www.sidewindercomputers.com/xsra750rxwak1.html

Or if you can't fit that rad into your case:

http://www.sidewindercomputers.com/xsra750rxwak.html

The 1st linked kit would be ideal if you were to add another component to the loop later on, like a video card. Otherwise the rx240 would be more than enough for a cpu only loop
    
CPUMotherboardGraphicsRAM
Xeon E5-1680 V2  R4BE  TITAN X (Pascal)   2666 Dominator Platinum CL10 
Hard DriveCoolingCoolingOS
750 NVMe 1.2TB EK HF/rx360/rx120 EK FC/GTs/mcp655 Windows 10 Pro  
MonitorPowerCaseAudio
BL3200PT 1600 T2 800d Pro Audio 2.1 + DragonFly Red 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Xeon E5-1680 V2  R4BE  TITAN X (Pascal)   2666 Dominator Platinum CL10 
Hard DriveCoolingCoolingOS
750 NVMe 1.2TB EK HF/rx360/rx120 EK FC/GTs/mcp655 Windows 10 Pro  
MonitorPowerCaseAudio
BL3200PT 1600 T2 800d Pro Audio 2.1 + DragonFly Red 
  hide details  
Reply
post #3 of 5
Thread Starter 
Do those support lga2011? I didnt sed compatibility with the 2011 socket unless theres a custom mounting bracket I need that they sell seperate?
post #4 of 5
For the CPU block, I really think that the Apogee HD is the ideal block for Skt2011 chips as it is larger than the Raystorm and is not convex. The mounting hardware is the best available in my opinion, and the restriction of the block is irrelevant since you should be getting a good pump anyway.
For the pump, I highly recommend the MCP35X, it's just a fantastic pump with huge amounts of pressure and it's PWM controlled so it's automated. Just be sure to get the heatsink.

For the radiator, the Alphacool NeXXos UT60 240 or 360 (or 280/420) would be the absolute best performance for the money, and is a better radiator than the RX except at 600rpm fan speeds. If you can fit a 280, go for it as you will have a total surface area similar to a 360 rad. Akasa and Bgears Blasters are the best 140mm rad fans available, though Koolance and XSPC make good ones too.
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #5 of 5
and larger waterblock is better atleast if u have better mounting, or else u will get very different temp on cores
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Need a water cooling recommendation for 3930k for 4.8ghz