so I'm kinda new to setting up this water cooling system. I have my radiator attached to the top of my case followed by two fans onto the radiator.. Next i have the cpu mount on top of the cpu and all the fans from the radiator and the back fan plugged into the cpu mount. Lastly my question is i have the 4pin connect plugged into my psu, and theres a 3pin connector that i currently plugged into pwr fan on my mother board. is this setup correct? if not please correct me and tell me how it should be done, because when i press the button on the cpumount i dont hear any difference.
post #1 of 17
9/16/12 at 3:22pm