Not sure if anyone else has experienced this, but I frequently have problems with rapid oc.
It's a great tool when working correctly. Quite often right after entering windows, if I try to hit the "+" button to bump the vcore it glitches.
The voltage seems to starts at 0.600V, so I have to hold the plus button down until it gets to the right value. It will bsod from lack of voltage if just pressed once or twice.
The other problem I have is the voltage will hit a wall... at say 1.52v , even though the max voltage set is higher. The on-screen will show it going up as it should to 1.6V, but os software and a multimeter show it has stopped at 1.52v
Anyone experience anything similar?