Modtek L33T Case Series – X812 PC Case
Starting with the appearance of this case, it's absolutely stunning. The entire "Monolithic" chassis is finished in black and wrapped in some very high quality steel and plastic. The major selling point of this case is in its top notch cooling performance. Up front through the mesh grill you get a 120mm Blue LED lit fan sucking plenty of air into the case while on the side you also get a large 120mm fan. On one side of the case, you also get a large window covering some of the side panel allowing you to show off your components, while the other part of the side panel has mesh for unprecedented graphics card cooling performance. Of course, the case also features some other pretty sweet features such as USB front headers, full support for many motherboard sizes, excellent cable management, and tool free installation.
Other Features:
Thumb Screws and convenient tool-free bays
Matrix Style Panel
Rubber Grommets for the PSU
CASE TYPE Hybrid Mid Tower Case
DIMENSIONS (W x H x D) 18 3/4 x 17 x 7 3/8
SIDE WINDOW DIMENSIONS 12 1/4 x 13 1/4
EXTERNAL DRIVE BAYS (4) 5.25" DRIVE BAYS
INTERNAL DRIVE BAYS (6) 3.5"/2.5" DRIVE BAYS
PCI EXPANSION SLOTS 7
SCREWLESS BAYS (5) 2x DVD 2x HDD 1x PCI
BAY COVERS Quick Release Fine Mesh
FRONT PANEL Power Button, Reset Button, 2x USB 2.0, 1x HD Audio Jack, 1x Microphone Jack with Internal Motherboard Connectors
MATERIAL(S) 0.6mm Steel, Plastic
MOTHERBOARD SUPPORT E-ATX, ATX, MICRO-ATX
COOLING SYSTEM
FRONT 1 X 120/140mm (1x 120mm Blue LED Fan included)
SIDE 1 X 120mm (1x 120mm Fan included)
BOTTOM VentingTS (7)
SCREWLESS BAYS (5) 2x DVD 2x HDD 1x PCI
BAY COVERS Quick Release Fine Mesh
FRONT PANEL Power Button, Reset Button, 2x USB 2.0, 1x HD Audio Jack, 1x Microphone Jack with Internal Motherboard Connectors
MATERIAL(S) 0.6mm Steel, Plastic
MOTHERBOARD SUPPORT E-ATX, ATX, MICRO-ATX
COOLING SYSTEM
FRONT, 1 X 120/140mm (1x 120mm Blue LED Fan included)
SIDE, 1 X 120mm (1x 120mm Fan included)
BOTTOM, Venting
OTHER FEATURES
Thumb Screws
Matrix Style Panel
Rubber Grommets for the PSU
Edited by Xoxide John - 9/18/12 at 9:09am
Starting with the appearance of this case, it's absolutely stunning. The entire "Monolithic" chassis is finished in black and wrapped in some very high quality steel and plastic. The major selling point of this case is in its top notch cooling performance. Up front through the mesh grill you get a 120mm Blue LED lit fan sucking plenty of air into the case while on the side you also get a large 120mm fan. On one side of the case, you also get a large window covering some of the side panel allowing you to show off your components, while the other part of the side panel has mesh for unprecedented graphics card cooling performance. Of course, the case also features some other pretty sweet features such as USB front headers, full support for many motherboard sizes, excellent cable management, and tool free installation.
Other Features:
Thumb Screws and convenient tool-free bays
Matrix Style Panel
Rubber Grommets for the PSU
CASE TYPE Hybrid Mid Tower Case
DIMENSIONS (W x H x D) 18 3/4 x 17 x 7 3/8
SIDE WINDOW DIMENSIONS 12 1/4 x 13 1/4
EXTERNAL DRIVE BAYS (4) 5.25" DRIVE BAYS
INTERNAL DRIVE BAYS (6) 3.5"/2.5" DRIVE BAYS
PCI EXPANSION SLOTS 7
SCREWLESS BAYS (5) 2x DVD 2x HDD 1x PCI
BAY COVERS Quick Release Fine Mesh
FRONT PANEL Power Button, Reset Button, 2x USB 2.0, 1x HD Audio Jack, 1x Microphone Jack with Internal Motherboard Connectors
MATERIAL(S) 0.6mm Steel, Plastic
MOTHERBOARD SUPPORT E-ATX, ATX, MICRO-ATX
COOLING SYSTEM
FRONT 1 X 120/140mm (1x 120mm Blue LED Fan included)
SIDE 1 X 120mm (1x 120mm Fan included)
BOTTOM VentingTS (7)
SCREWLESS BAYS (5) 2x DVD 2x HDD 1x PCI
BAY COVERS Quick Release Fine Mesh
FRONT PANEL Power Button, Reset Button, 2x USB 2.0, 1x HD Audio Jack, 1x Microphone Jack with Internal Motherboard Connectors
MATERIAL(S) 0.6mm Steel, Plastic
MOTHERBOARD SUPPORT E-ATX, ATX, MICRO-ATX
COOLING SYSTEM
FRONT, 1 X 120/140mm (1x 120mm Blue LED Fan included)
SIDE, 1 X 120mm (1x 120mm Fan included)
BOTTOM, Venting
OTHER FEATURES
Thumb Screws
Matrix Style Panel
Rubber Grommets for the PSU
Edited by Xoxide John - 9/18/12 at 9:09am
