Hey guys, continuing my downsize here and this monitor was next to go. I really like it but unfortunately the dot pitch is too high for me and gives me headaches to look at, I had to go back to my 26" 1200p screen. As far as I can tell, its pixel perfect. I checked it over closely and can't see any dead/stuck pixels when I got it. There is one small crack on the bottom of the bezel from me taking it apart to tighten the PCB in the back as it was somewhat loose.
What should I ask for this? Shipping will likely be expensive, it will go in its original box as it managed to survive the trip from korea in it. Thanks for your time!
The crack is here, you can barely see it. Only on the bottom, does not extend to the front.
Edited by Scorpion49 - 9/22/12 at 11:52pm
What should I ask for this? Shipping will likely be expensive, it will go in its original box as it managed to survive the trip from korea in it. Thanks for your time!
The crack is here, you can barely see it. Only on the bottom, does not extend to the front.
Edited by Scorpion49 - 9/22/12 at 11:52pm
