Below is a picture of my second WC build (first real build). Originally I planned to build 2 separate loops - 1 loop for the CPU and 1 loop for the GPUs where the rads, pumps, etc. in both loops are the same. The more I look at my case the more I realize this will be nightmare in terms of routing.
Assuming I decide to go with just 1 loop my question is are (2) Koolance PMP-450S Strong pumps in series and (2) Aquacomputer Airplex Modularity 360 rads in series be enough to handle (1) 3930K @ 1.4v and (3) ASUS GTX680-DC2T-2GD5 around stock voltages?
Each rad has (3) Scythe Gentle Typhoon 120mm AP-15s in push with (3) TFC Xtender 120mm shrouds. Each side of the case has (4) AP-15s at the buttom pulling in cool air. Check my signature for more part details.
Thanks.

Edited by D749 - 9/23/12 at 8:28pm
Assuming I decide to go with just 1 loop my question is are (2) Koolance PMP-450S Strong pumps in series and (2) Aquacomputer Airplex Modularity 360 rads in series be enough to handle (1) 3930K @ 1.4v and (3) ASUS GTX680-DC2T-2GD5 around stock voltages?
Each rad has (3) Scythe Gentle Typhoon 120mm AP-15s in push with (3) TFC Xtender 120mm shrouds. Each side of the case has (4) AP-15s at the buttom pulling in cool air. Check my signature for more part details.
Thanks.

Edited by D749 - 9/23/12 at 8:28pm










Believe it or not I had +1 QDC in that loop but I had to remove it due to the bend radius of the tubing. When I redo the loop I plan to cut down on the QDCs but not by too much. I love the flexibility that come with QDCs.