Overclock.net › Forums › Components › Monitors and Displays › This stand with a 27" Korean monitor?
New Posts  All Forums:Forum Nav:

This stand with a 27" Korean monitor? - Page 2

post #11 of 16
Thread Starter 
The base of the stand is attached with two screws. The arm of the stand comes preattached to the monitor. That is the part I am curious about.
post #12 of 16
I have two Shimians and can confirm that the arm is attached with one bolt and can be removed easily.

Both my Shimians are attached to a 3M LCD Stand, which works great. Pivot, rotate, swivel, and height.

http://www.amazon.com/3M-Easy-Adjust-Monitor-Stand-MS110MB/dp/B0013CD0DI/ref=sr_1_1?ie=UTF8&qid=1349125802&sr=8-1&keywords=3m+lcd+stand

Just be aware that the VESA mount holes on the Shimian are very shallow for some reason. The screws that came with the 3M were too long. I had to go to Lowes and buy some shorter M4 screws.
post #13 of 16
Thread Starter 
That's great info! Any chance of a few pics of your set up? I am considering doing exactly the same.
post #14 of 16
Quote:
Originally Posted by nexus99 View Post

That's great info! Any chance of a few pics of your set up? I am considering doing exactly the same.


post #15 of 16
Thread Starter 
How tip proof are the stands? Does it seem like they would be easy to bump over?
post #16 of 16
Quote:
Originally Posted by nexus99 View Post

How tip proof are the stands? Does it seem like they would be easy to bump over?

The metal base of the stand has a fair amount of weight to it. These monitors are big, but they are pretty light. It does not seem like the monitors would tip or be able to bump over. I like the stand so much I bought 3 of them. smile.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Monitors and Displays
Overclock.net › Forums › Components › Monitors and Displays › This stand with a 27" Korean monitor?