Overclock.net › Forums › Cooling › Water Cooling › watercooling help
New Posts  All Forums:Forum Nav:

watercooling help - Page 2

post #11 of 19
What size radiator are you using?
post #12 of 19
Thread Starter 
i was thinking of mounting the rad on the underside of a shelf that is over the computer and have the reservoir also mounted somewhere on the outside of it then the rest on the inside or something like that
post #13 of 19
Thread Starter 
probably going to end up using a 4x120mm rad for the build
post #14 of 19
Quote:
Originally Posted by kadrit View Post

probably going to end up using a 4x120mm rad for the build
That will be sufficient just make sure you get a good Pump like the MCP655. Good luck on your build all i can say is you will have lots of fun!
post #15 of 19
Thread Starter 
thanks and i am still having trouble finding a good pump to use i figure im probably going to be using at least 15 feet of tubing for it but i dont know what pump would work with that while keeping a good lmp flow any suggestions would help a lot
post #16 of 19
Honestly there's really two good pumps people will reccomend to you either an MCP35x or a D5 (like Alphacool VP655)
post #17 of 19
Thread Starter 
i was thinking about going with the mpc35x or the x2
post #18 of 19
Go for the 35x, it's a great pump.
post #19 of 19
Thread Starter 
here is a rough sketch of what the general design will be

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › watercooling help