Overclock.net › Forums › Cooling › Air Cooling › Will the Hyper 212 Plus fit in my Antec One case with side panel installed? (Urgent)
New Posts  All Forums:Forum Nav:

Will the Hyper 212 Plus fit in my Antec One case with side panel installed? (Urgent)

post #1 of 2
Thread Starter 
SO I want to get the Antec One Illusion which is the same as the Antec One but with a side panel fan installed and blue leds. I want to know if the Hyper 212 Plus will fit in my case even if there's a side panel fan installed. The case can be seen here (http://www.newegg.com/Product/Product.aspx?Item=N82E16811129182) and the Hyper 212 Plus here (http://www.newegg.com/Product/Product.aspx?Item=N82E16835103065) Please help guys.
post #2 of 2
Eh, I wouldn't bank on it. I have a Rosewill Blackhawk case and the dimensions listed are 8.35" x 19.89" x 20.28" (WxHxD) (bezel included), and the Antec One is listed on NewEgg as 17.2" x 8.2" x 19.2" (scratches head). I think that dimension is HxWxD, and if so that means it is narrower than mine, and I had to remove my side fan.

Use Google images and see if you can find a pic with that case and the cooler installed. That cooler is pretty common, so you'll likely find your answer.

I cannot even use a low profile fan on mine with the cooler mounted vertically.

Not if you can clear everything in the case (RAM is the biggest concern) and mount the cooler horizontally I think you'd be ok, and in my case I think I would be also - *but* you'd want to get fans that could be mounted horizontally - I think 2ball bearing fans are most ideal for this.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Will the Hyper 212 Plus fit in my Antec One case with side panel installed? (Urgent)